12. PJSUA2 API Reference Manuals¶

endpoint.hpp¶

PJSUA2 Base Agent Operation.

namespace pj¶

PJSUA2 API is inside pj namespace.

Typedefs

typedef std::vector<SslCertName> SslCertNameVector¶: Array of SSL certificate type and name.

class Endpoint

#include <endpoint.hpp>

Endpoint represents an instance of pjsua library.

There can only be one instance of pjsua library in an application, hence this class is a singleton.

Public Functions

Endpoint(): Default constructor.

virtual ~Endpoint(): Virtual destructor.

Version libVersion() const: Get library version.

void libCreate()

Instantiate pjsua application.

Application must call this function before calling any other functions, to make sure that the underlying libraries are properly initialized. Once this function has returned success, application must call libDestroy() before quitting.

pjsua_state libGetState() const

Get library state.

Return: library state.

void libInit(const EpConfig &prmEpConfig)

Initialize pjsua with the specified settings.

All the settings are optional, and the default values will be used when the config is not specified.

Note that create() MUST be called before calling this function.

Parameters

prmEpConfig: Endpoint configurations

void libStart()

Call this function after all initialization is done, so that the library can do additional checking set up.

Application may call this function any time after init().

void libRegisterThread(const string &name)

Note that each time this function is called, it will allocate some memory to store the thread description, which will only be freed when the library is destroyed.

Parameters

name: The optional name to be assigned to the thread.

bool libIsThreadRegistered()

Check if this thread has been registered to the library.

Note that this function is only applicable for library main & worker threads and external/native threads registered using libRegisterThread().

void libStopWorkerThreads(): Stop all worker threads.

int libHandleEvents(unsigned msec_timeout)

Poll pjsua for events, and if necessary block the caller thread for the specified maximum interval (in miliseconds).

Application doesn’t normally need to call this function if it has configured worker thread (thread_cnt field) in pjsua_config structure, because polling then will be done by these worker threads instead.

If EpConfig::UaConfig::mainThreadOnly is enabled and this function is called from the main thread (by default the main thread is thread that calls libCreate()), this function will also scan and run any pending jobs in the list.

Return

The number of events that have been handled during the poll. Negative value indicates error, and application can retrieve the error as (status = -return_value).

Parameters

msec_timeout: Maximum time to wait, in miliseconds.

void libDestroy(unsigned prmFlags = 0)

Destroy pjsua.

Application is recommended to perform graceful shutdown before calling this function (such as unregister the account from the SIP server, terminate presense subscription, and hangup active calls), however, this function will do all of these if it finds there are active sessions that need to be terminated. This function will block for few seconds to wait for replies from remote.

Application.may safely call this function more than once if it doesn’t keep track of it’s state.

Parameters

prmFlags: Combination of pjsua_destroy_flag enumeration.

string utilStrError(pj_status_t prmErr)

Retrieve the error string for the specified status code.

Parameters

prmErr: The error code.

void utilLogWrite(int prmLevel, const string &prmSender, const string &prmMsg)

Write a log message.

Parameters

prmLevel: Log verbosity level (1-5)
prmSender: The log sender.
prmMsg: The log message.

void utilLogWrite(LogEntry &e)

Write a log entry.

Application must implement its own custom LogWriter and this function will then call the LogWriter::write() method. Note that this function does not call PJSIP’s internal logging functionality. For that, you should use utilLogWrite(prmLevel, prmSender, prmMsg) above.

Parameters

e: The log entry.

pj_status_t utilVerifySipUri(const string &prmUri)

This is a utility function to verify that valid SIP url is given.

If the URL is a valid SIP/SIPS scheme, PJ_SUCCESS will be returned.

Return

PJ_SUCCESS on success, or the appropriate error code.

See

utilVerifyUri()

Parameters

prmUri: The URL string.

pj_status_t utilVerifyUri(const string &prmUri)

This is a utility function to verify that valid URI is given.

Unlike utilVerifySipUri(), this function will return PJ_SUCCESS if tel: URI is given.

Return

PJ_SUCCESS on success, or the appropriate error code.

See

pjsua_verify_sip_url()

Parameters

prmUri: The URL string.

Token utilTimerSchedule(unsigned prmMsecDelay, Token prmUserData)

Schedule a timer with the specified interval and user data.

When the interval elapsed, onTimer() callback will be called. Note that the callback may be executed by different thread, depending on whether worker thread is enabled or not.

Return

Token to identify the timer, which could be given to utilTimerCancel().

Parameters

prmMsecDelay: The time interval in msec.
prmUserData: Arbitrary user data, to be given back to application in the callback.

void utilTimerCancel(Token prmToken)

Cancel previously scheduled timer with the specified timer token.

Parameters

prmToken: The timer token, which was returned from previous utilTimerSchedule() call.

void utilAddPendingJob(PendingJob *job)

Utility to register a pending job to be executed by main thread.

If EpConfig::UaConfig::mainThreadOnly is false, the job will be executed immediately.

Parameters

job: The job class.

IntVector utilSslGetAvailableCiphers(): Get cipher list supported by SSL/TLS backend.

void natDetectType(void)

This is a utility function to detect NAT type in front of this endpoint.

Once invoked successfully, this function will complete asynchronously and report the result in onNatDetectionComplete().

After NAT has been detected and the callback is called, application can get the detected NAT type by calling natGetType(). Application can also perform NAT detection by calling natDetectType() again at later time.

Note that STUN must be enabled to run this function successfully.

pj_stun_nat_type natGetType()

Get the NAT type as detected by natDetectType() function.

This function will only return useful NAT type after natDetectType() has completed successfully and onNatDetectionComplete() callback has been called.

Exception: if this function is called while detection is in progress, PJ_EPENDING exception will be raised.

void natUpdateStunServers(const StringVector &prmServers, bool prmWait)

Update the STUN servers list.

The libInit() must have been called before calling this function.

Parameters

prmServers: Array of STUN servers to try. The endpoint will try to resolve and contact each of the STUN server entry until it finds one that is usable. Each entry may be a domain name, host name, IP address, and it may contain an optional port number. For example:
- ”pjsip.org” (domain name)
- ”sip.pjsip.org” (host name)
- ”pjsip.org:33478” (domain name and a non- standard port number)
- ”10.0.0.1:3478” (IP address and port number)
prmWait: Specify if the function should block until it gets the result. In this case, the function will block while the resolution is being done, and the callback onNatCheckStunServersComplete() will be called before this function returns.

void natCheckStunServers(const StringVector &prmServers, bool prmWait, Token prmUserData)

Auxiliary function to resolve and contact each of the STUN server entries (sequentially) to find which is usable.

The libInit() must have been called before calling this function.

See

natCancelCheckStunServers()

Parameters

prmServers: Array of STUN servers to try. The endpoint will try to resolve and contact each of the STUN server entry until it finds one that is usable. Each entry may be a domain name, host name, IP address, and it may contain an optional port number. For example:
- ”pjsip.org” (domain name)
- ”sip.pjsip.org” (host name)
- ”pjsip.org:33478” (domain name and a non- standard port number)
- ”10.0.0.1:3478” (IP address and port number)
prmWait: Specify if the function should block until it gets the result. In this case, the function will block while the resolution is being done, and the callback will be called before this function returns.
prmUserData: Arbitrary user data to be passed back to application in the callback.

void natCancelCheckStunServers(Token token, bool notify_cb = false)

Cancel pending STUN resolution which match the specified token.

Exception: PJ_ENOTFOUND if there is no matching one, or other error.

Parameters

token: The token to match. This token was given to natCheckStunServers()
notify_cb: Boolean to control whether the callback should be called for cancelled resolutions. When the callback is called, the status in the result will be set as PJ_ECANCELLED.

TransportId transportCreate(pjsip_transport_type_e type, const TransportConfig &cfg)

Create and start a new SIP transport according to the specified settings.

Return

The transport ID.

Parameters

type: Transport type.
cfg: Transport configuration.

IntVector transportEnum()

Enumerate all transports currently created in the system.

This function will return all transport IDs, and application may then call transportGetInfo() function to retrieve detailed information about the transport.

Return: Array of transport IDs.

TransportInfo transportGetInfo(TransportId id)

Get information about transport.

Return

Transport info.

Parameters

id: Transport ID.

void transportSetEnable(TransportId id, bool enabled)

Disable a transport or re-enable it.

By default transport is always enabled after it is created. Disabling a transport does not necessarily close the socket, it will only discard incoming messages and prevent the transport from being used to send outgoing messages.

Parameters

id: Transport ID.
enabled: Enable or disable the transport.

void transportClose(TransportId id)

Close the transport.

The system will wait until all transactions are closed while preventing new users from using the transport, and will close the transport when its usage count reaches zero.

Parameters

id: Transport ID.

void transportShutdown(TransportHandle tp)

Start graceful shutdown procedure for this transport handle.

After graceful shutdown has been initiated, no new reference can be obtained for the transport. However, existing objects that currently uses the transport may still use this transport to send and receive packets. After all objects release their reference to this transport, the transport will be destroyed immediately.

Note: application normally uses this API after obtaining the handle from onTransportState() callback.

Parameters

tp: The transport.

void hangupAllCalls(void)

Terminate all calls.

This will initiate call hangup for all currently active calls.

void mediaAdd(AudioMedia &media)

Add media to the media list.

Parameters

media: media to be added.

void mediaRemove(AudioMedia &media)

Remove media from the media list.

Parameters

media: media to be removed.

bool mediaExists(const AudioMedia &media) const

Check if media has been added to the media list.

Return

True if media has been added, false otherwise.

Parameters

media: media to be check.

unsigned mediaMaxPorts() const

Get maximum number of media port.

Return: Maximum number of media port in the conference bridge.

unsigned mediaActivePorts() const

Get current number of active media port in the bridge.

Return: The number of active media port.

const AudioMediaVector &mediaEnumPorts() const

Warning: deprecated, use mediaEnumPorts2() instead.

This function is not safe in multithreaded environment.

Enumerate all media port.

Return: The list of media port.

AudioMediaVector2 mediaEnumPorts2() const

Enumerate all audio media port.

Return: The list of audio media port.

VideoMediaVector mediaEnumVidPorts() const

Enumerate all video media port.

Return: The list of video media port.

AudDevManager &audDevManager()

Get the instance of Audio Device Manager.

Return: The Audio Device Manager.

VidDevManager &vidDevManager()

Get the instance of Video Device Manager.

Return: The Video Device Manager.

const CodecInfoVector &codecEnum()

Warning: deprecated, use codecEnum2() instead.

This function is not safe in multithreaded environment.

Enum all supported codecs in the system.

Return: Array of codec info.

CodecInfoVector2 codecEnum2() const

Enum all supported codecs in the system.

Return: Array of codec info.

void codecSetPriority(const string &codec_id, pj_uint8_t priority)

Change codec priority.

Parameters

codec_id: Codec ID, which is a string that uniquely identify the codec (such as “speex/8000”).
priority: Codec priority, 0-255, where zero means to disable the codec.

CodecParam codecGetParam(const string &codec_id) const

Get codec parameters.

Return

Codec parameters. If codec is not found, Error will be thrown.

Parameters

codec_id: Codec ID.

void codecSetParam(const string &codec_id, const CodecParam param)

Set codec parameters.

Parameters

codec_id: Codec ID.
param: Codec parameter to set. Set to NULL to reset codec parameter to library default settings.

const CodecInfoVector &videoCodecEnum()

Warning: deprecated, use videoCodecEnum2() instead.

This function is not safe in multithreaded environment.

Enum all supported video codecs in the system.

Return: Array of video codec info.

CodecInfoVector2 videoCodecEnum2() const

Enum all supported video codecs in the system.

Return: Array of video codec info.

void videoCodecSetPriority(const string &codec_id, pj_uint8_t priority)

Change video codec priority.

Parameters

codec_id: Codec ID, which is a string that uniquely identify the codec (such as “H263/90000”). Please see pjsua manual or pjmedia codec reference for details.
priority: Codec priority, 0-255, where zero means to disable the codec.

VidCodecParam getVideoCodecParam(const string &codec_id) const

Get video codec parameters.

Return

Codec parameters. If codec is not found, Error will be thrown.

Parameters

codec_id: Codec ID.

void setVideoCodecParam(const string &codec_id, const VidCodecParam &param)

Set video codec parameters.

Parameters

codec_id: Codec ID.
param: Codec parameter to set.

void resetVideoCodecParam(const string &codec_id)

Reset video codec parameters to library default settings.

Parameters

codec_id: Codec ID.

StringVector srtpCryptoEnum()

Enumerate all SRTP crypto-suite names.

Return: The list of SRTP crypto-suite name.

void handleIpChange(const IpChangeParam &param)

Inform the stack that IP address change event was detected.

The stack will:

Restart the listener (this step is configurable via IpChangeParam.restartListener).
Shutdown the transport used by account registration (this step is configurable via AccountConfig.ipChangeConfig.shutdownTp).
Update contact URI by sending re-Registration (this step is configurable via a\ AccountConfig.natConfig.contactRewriteUse and a\ AccountConfig.natConfig.contactRewriteMethod)
Hangup active calls (this step is configurable via a\ AccountConfig.ipChangeConfig.hangupCalls) or continue the call by sending re-INVITE (configurable via AccountConfig.ipChangeConfig.reinviteFlags).

Return

PJ_SUCCESS on success, other on error.

Parameters

param: The IP change parameter, have a look at #IpChangeParam.

virtual void onNatDetectionComplete(const OnNatDetectionCompleteParam &prm)

Callback when the Endpoint has finished performing NAT type detection that is initiated with natDetectType().

Parameters

prm: Callback parameters containing the detection result.

virtual void onNatCheckStunServersComplete(const OnNatCheckStunServersCompleteParam &prm)

Callback when the Endpoint has finished performing STUN server checking that is initiated when calling libInit(), or by calling natCheckStunServers() or natUpdateStunServers().

Parameters

prm: Callback parameters.

virtual void onTransportState(const OnTransportStateParam &prm)

This callback is called when transport state has changed.

Parameters

prm: Callback parameters.

virtual void onTimer(const OnTimerParam &prm)

Callback when a timer has fired.

The timer was scheduled by utilTimerSchedule().

Parameters

prm: Callback parameters.

virtual void onSelectAccount(OnSelectAccountParam &prm)

This callback can be used by application to override the account to be used to handle an incoming message.

Initially, the account to be used will be calculated automatically by the library. This initial account will be used if application does not implement this callback, or application sets an invalid account upon returning from this callback.

Note that currently the incoming messages requiring account assignment are INVITE, MESSAGE, SUBSCRIBE, and unsolicited NOTIFY. This callback may be called before the callback of the SIP event itself, i.e: incoming call, pager, subscription, or unsolicited-event.

Parameters

prm: Callback parameters.

virtual void onIpChangeProgress(OnIpChangeProgressParam &prm)

Calling handleIpChange() may involve different operation.

This callback is called to report the progress of each enabled operation.

Parameters

prm: Callback parameters.

virtual void onMediaEvent(OnMediaEventParam &prm)

Notification about media events such as video notifications.

This callback will most likely be called from media threads, thus application must not perform heavy processing in this callback. If application needs to perform more complex tasks to handle the event, it should post the task to another thread.

Parameters

prm: Callback parameter.

Public Static Functions

static Endpoint &instance(): Retrieve the singleton instance of the endpoint.

Private Functions

void performPendingJobs()¶

void clearCodecInfoList(CodecInfoVector &codec_list)¶

void updateCodecInfoList(pjsua_codec_info pj_codec[], unsigned count, CodecInfoVector &codec_list)¶

Private Members

LogWriter *writer¶

AudDevManager audioDevMgr¶

VidDevManager videoDevMgr¶

CodecInfoVector codecInfoList¶

CodecInfoVector videoCodecInfoList¶

std::map<pj_thread_t *, pj_thread_desc *> threadDescMap¶

pj_mutex_t *threadDescMutex¶

AudioMediaVector mediaList¶

pj_mutex_t *mediaListMutex¶

bool mainThreadOnly¶

void *mainThread¶

unsigned pendingJobSize¶

std::list<PendingJob *> pendingJobs¶

Private Static Functions

static void logFunc(int level, const char *data, int len)¶

static void stun_resolve_cb(const pj_stun_resolve_result *result)¶

static void on_timer(pj_timer_heap_t *timer_heap, struct pj_timer_entry *entry)¶

static void on_nat_detect(const pj_stun_nat_detect_result *res)¶

static void on_transport_state(pjsip_transport *tp, pjsip_transport_state state, const pjsip_transport_state_info *info)¶

static Account *lookupAcc(int acc_id, const char *op)¶

static Call *lookupCall(int call_id, const char *op)¶

static void on_incoming_call(pjsua_acc_id acc_id, pjsua_call_id call_id, pjsip_rx_data *rdata)¶

static void on_reg_started(pjsua_acc_id acc_id, pj_bool_t renew)¶

static void on_reg_state2(pjsua_acc_id acc_id, pjsua_reg_info *info)¶

static void on_incoming_subscribe(pjsua_acc_id acc_id, pjsua_srv_pres *srv_pres, pjsua_buddy_id buddy_id, const pj_str_t *from, pjsip_rx_data *rdata, pjsip_status_code *code, pj_str_t *reason, pjsua_msg_data *msg_data)¶

static void on_pager2(pjsua_call_id call_id, const pj_str_t *from, const pj_str_t *to, const pj_str_t *contact, const pj_str_t *mime_type, const pj_str_t *body, pjsip_rx_data *rdata, pjsua_acc_id acc_id)¶

static void on_pager_status2(pjsua_call_id call_id, const pj_str_t *to, const pj_str_t *body, void *user_data, pjsip_status_code status, const pj_str_t *reason, pjsip_tx_data *tdata, pjsip_rx_data *rdata, pjsua_acc_id acc_id)¶

static void on_typing2(pjsua_call_id call_id, const pj_str_t *from, const pj_str_t *to, const pj_str_t *contact, pj_bool_t is_typing, pjsip_rx_data *rdata, pjsua_acc_id acc_id)¶

static void on_mwi_info(pjsua_acc_id acc_id, pjsua_mwi_info *mwi_info)¶

static void on_acc_find_for_incoming(const pjsip_rx_data *rdata, pjsua_acc_id *acc_id)¶

static void on_buddy_state(pjsua_buddy_id buddy_id)¶

static void on_buddy_evsub_state(pjsua_buddy_id buddy_id, pjsip_evsub *sub, pjsip_event *event)¶

static void on_call_state(pjsua_call_id call_id, pjsip_event *e)¶

static void on_call_tsx_state(pjsua_call_id call_id, pjsip_transaction *tsx, pjsip_event *e)¶

static void on_call_media_state(pjsua_call_id call_id)¶

static void on_call_sdp_created(pjsua_call_id call_id, pjmedia_sdp_session *sdp, pj_pool_t *pool, const pjmedia_sdp_session *rem_sdp)¶

static void on_stream_created2(pjsua_call_id call_id, pjsua_on_stream_created_param *param)¶

static void on_stream_destroyed(pjsua_call_id call_id, pjmedia_stream *strm, unsigned stream_idx)¶

static void on_dtmf_digit(pjsua_call_id call_id, int digit)¶

static void on_dtmf_digit2(pjsua_call_id call_id, const pjsua_dtmf_info *info)¶

static void on_call_transfer_request(pjsua_call_id call_id, const pj_str_t *dst, pjsip_status_code *code)¶

static void on_call_transfer_request2(pjsua_call_id call_id, const pj_str_t *dst, pjsip_status_code *code, pjsua_call_setting *opt)¶

static void on_call_transfer_status(pjsua_call_id call_id, int st_code, const pj_str_t *st_text, pj_bool_t final, pj_bool_t *p_cont)¶

static void on_call_replace_request(pjsua_call_id call_id, pjsip_rx_data *rdata, int *st_code, pj_str_t *st_text)¶

static void on_call_replace_request2(pjsua_call_id call_id, pjsip_rx_data *rdata, int *st_code, pj_str_t *st_text, pjsua_call_setting *opt)¶

static void on_call_replaced(pjsua_call_id old_call_id, pjsua_call_id new_call_id)¶

static void on_call_rx_offer(pjsua_call_id call_id, const pjmedia_sdp_session *offer, void *reserved, pjsip_status_code *code, pjsua_call_setting *opt)¶

static void on_call_rx_reinvite(pjsua_call_id call_id, const pjmedia_sdp_session *offer, pjsip_rx_data *rdata, void *reserved, pj_bool_t *async, pjsip_status_code *code, pjsua_call_setting *opt)¶

static void on_call_tx_offer(pjsua_call_id call_id, void *reserved, pjsua_call_setting *opt)¶

static pjsip_redirect_op on_call_redirected(pjsua_call_id call_id, const pjsip_uri *target, const pjsip_event *e)¶

static pj_status_t on_call_media_transport_state(pjsua_call_id call_id, const pjsua_med_tp_state_info *info)¶

static void on_media_event(pjmedia_event *event)¶

static void on_call_media_event(pjsua_call_id call_id, unsigned med_idx, pjmedia_event *event)¶

static pjmedia_transport *on_create_media_transport(pjsua_call_id call_id, unsigned media_idx, pjmedia_transport *base_tp, unsigned flags)¶

static void on_create_media_transport_srtp(pjsua_call_id call_id, unsigned media_idx, pjmedia_srtp_setting *srtp_opt)¶

static void on_ip_change_progress(pjsua_ip_change_op op, pj_status_t status, const pjsua_ip_change_op_info *info)¶

Private Static Attributes

Endpoint *instance_¶

struct EpConfig : public pj::PersistentObject

#include <endpoint.hpp>

Endpoint configuration.

Public Functions

virtual void readObject(const ContainerNode &node)¶

Read this object from a container.

Parameters

node: Container to write values from.

virtual void writeObject(ContainerNode &node) const¶

Write this object to a container.

Parameters

node: Container to write values to.

Public Members

UaConfig uaConfig¶: UA config.

LogConfig logConfig¶: Logging config.

MediaConfig medConfig¶: Media config.

struct IpChangeParam¶

#include <endpoint.hpp>

Parameter of Endpoint::handleIpChange().

Public Functions

IpChangeParam()¶: Constructor.

pjsua_ip_change_param toPj() const¶: Export to pjsua_ip_change_param.

void fromPj(const pjsua_ip_change_param &param)¶: Convert from pjsip.

Public Members

bool restartListener¶

If set to PJ_TRUE, this will restart the transport listener.

Default : PJ_TRUE

unsigned restartLisDelay¶

If restartListener is set to PJ_TRUE, some delay might be needed for the listener to be restarted.

Use this to set the delay.

Default : PJSUA_TRANSPORT_RESTART_DELAY_TIME

struct LogConfig : public pj::PersistentObject

#include <endpoint.hpp>

Logging configuration, which can be (optionally) specified when calling Lib::init().

Public Functions

LogConfig()¶: Default constructor initialises with default values.

void fromPj(const pjsua_logging_config &lc)¶: Construct from pjsua_logging_config.

pjsua_logging_config toPj() const¶: Generate pjsua_logging_config.

virtual void readObject(const ContainerNode &node)¶

Read this object from a container.

Parameters

node: Container to write values from.

virtual void writeObject(ContainerNode &node) const¶

Write this object to a container.

Parameters

node: Container to write values to.

Public Members

unsigned msgLogging¶: Log incoming and outgoing SIP message? Yes!

unsigned level¶

Input verbosity level.

Value 5 is reasonable.

unsigned consoleLevel¶

Verbosity level for console.

Value 4 is reasonable.

unsigned decor¶: Log decoration.

string filename¶: Optional log filename if app wishes the library to write to log file.

unsigned fileFlags¶

Additional flags to be given to pj_file_open() when opening the log file.

By default, the flag is PJ_O_WRONLY. Application may set PJ_O_APPEND here so that logs are appended to existing file instead of overwriting it.

Default is 0.

LogWriter *writer¶

Custom log writer, if required.

This instance will be destroyed by the endpoint when the endpoint is destroyed.

struct LogEntry

#include <endpoint.hpp>

Data containing log entry to be written by the LogWriter.

Public Members

int level¶: Log verbosity level of this message.

string msg¶: The log message.

long threadId¶: ID of current thread.

string threadName¶: The name of the thread that writes this log.

class LogWriter

#include <endpoint.hpp>

Interface for writing log messages.

Applications can inherit this class and supply it in the LogConfig structure to implement custom log writing facility.

Public Functions

virtual ~LogWriter(): Destructor.

virtual void write(const LogEntry &entry) = 0: Write a log entry.

struct MediaConfig : public pj::PersistentObject

#include <endpoint.hpp>

This structure describes media configuration, which will be specified when calling Lib::init().

Public Functions

MediaConfig()¶: Default constructor initialises with default values.

void fromPj(const pjsua_media_config &mc)¶: Construct from pjsua_media_config.

pjsua_media_config toPj() const¶: Export.

virtual void readObject(const ContainerNode &node)¶

Read this object from a container.

Parameters

node: Container to write values from.

virtual void writeObject(ContainerNode &node) const¶

Write this object to a container.

Parameters

node: Container to write values to.

Public Members

unsigned clockRate¶

Clock rate to be applied to the conference bridge.

If value is zero, default clock rate will be used (PJSUA_DEFAULT_CLOCK_RATE, which by default is 16KHz).

unsigned sndClockRate¶

Clock rate to be applied when opening the sound device.

If value is zero, conference bridge clock rate will be used.

unsigned channelCount¶: Channel count be applied when opening the sound device and conference bridge.

unsigned audioFramePtime¶

Specify audio frame ptime.

The value here will affect the samples per frame of both the sound device and the conference bridge. Specifying lower ptime will normally reduce the latency.

Default value: PJSUA_DEFAULT_AUDIO_FRAME_PTIME

unsigned maxMediaPorts¶

Specify maximum number of media ports to be created in the conference bridge.

Since all media terminate in the bridge (calls, file player, file recorder, etc), the value must be large enough to support all of them. However, the larger the value, the more computations are performed.

Default value: PJSUA_MAX_CONF_PORTS

bool hasIoqueue¶

Specify whether the media manager should manage its own ioqueue for the RTP/RTCP sockets.

If yes, ioqueue will be created and at least one worker thread will be created too. If no, the RTP/RTCP sockets will share the same ioqueue as SIP sockets, and no worker thread is needed.

Normally application would say yes here, unless it wants to run everything from a single thread.

unsigned threadCnt¶

Specify the number of worker threads to handle incoming RTP packets.

A value of one is recommended for most applications.

unsigned quality¶

Media quality, 0-10, according to this table: 5-10: resampling use large filter, 3-4: resampling use small filter, 1-2: resampling use linear.

The media quality also sets speex codec quality/complexity to the number.

Default: 5 (PJSUA_DEFAULT_CODEC_QUALITY).

unsigned ptime¶

Specify default codec ptime.

Default: 0 (codec specific)

bool noVad¶

Disable VAD?

Default: 0 (no (meaning VAD is enabled))

unsigned ilbcMode¶

iLBC mode (20 or 30).

Default: 30 (PJSUA_DEFAULT_ILBC_MODE)

unsigned txDropPct¶

Percentage of RTP packet to drop in TX direction (to simulate packet lost).

Default: 0

unsigned rxDropPct¶

Percentage of RTP packet to drop in RX direction (to simulate packet lost).

Default: 0

unsigned ecOptions¶

Echo canceller options (see pjmedia_echo_create()).

Specify PJMEDIA_ECHO_USE_SW_ECHO here if application wishes to use software echo canceller instead of device EC.

Default: 0.

unsigned ecTailLen¶

Echo canceller tail length, in miliseconds.

Setting this to zero will disable echo cancellation.

Default: PJSUA_DEFAULT_EC_TAIL_LEN

unsigned sndRecLatency¶

Audio capture buffer length, in milliseconds.

Default: PJMEDIA_SND_DEFAULT_REC_LATENCY

unsigned sndPlayLatency¶

Audio playback buffer length, in milliseconds.

Default: PJMEDIA_SND_DEFAULT_PLAY_LATENCY

int jbInit¶

Jitter buffer initial prefetch delay in msec.

The value must be between jb_min_pre and jb_max_pre below.

Default: -1 (to use default stream settings, currently 150 msec)

int jbMinPre¶

Jitter buffer minimum prefetch delay in msec.

Default: -1 (to use default stream settings, currently 60 msec)

int jbMaxPre¶

Jitter buffer maximum prefetch delay in msec.

Default: -1 (to use default stream settings, currently 240 msec)

int jbMax¶

Set maximum delay that can be accomodated by the jitter buffer msec.

Default: -1 (to use default stream settings, currently 360 msec)

int sndAutoCloseTime¶

Specify idle time of sound device before it is automatically closed, in seconds.

Use value -1 to disable the auto-close feature of sound device

Default : 1

bool vidPreviewEnableNative¶

Specify whether built-in/native preview should be used if available.

In some systems, video input devices have built-in capability to show preview window of the device. Using this built-in preview is preferable as it consumes less CPU power. If built-in preview is not available, the library will perform software rendering of the input. If this field is set to PJ_FALSE, software preview will always be used.

Default: PJ_TRUE

struct OnIpChangeProgressParam¶

#include <endpoint.hpp>

Parameter of Endpoint::onIpChangeProgress().

Public Members

pjsua_ip_change_op op¶: The IP change progress operation.

pj_status_t status¶: The operation progress status.

TransportId transportId¶

Information of the transport id.

This is only available when the operation is PJSUA_IP_CHANGE_OP_RESTART_LIS.

int accId¶

Information of the account id.

This is only available when the operation is:

PJSUA_IP_CHANGE_OP_ACC_SHUTDOWN_TP
PJSUA_IP_CHANGE_OP_ACC_UPDATE_CONTACT
PJSUA_IP_CHANGE_OP_ACC_HANGUP_CALLS
PJSUA_IP_CHANGE_OP_ACC_REINVITE_CALLS

int callId¶

Information of the call id.

This is only available when the operation is PJSUA_IP_CHANGE_OP_ACC_HANGUP_CALLS or PJSUA_IP_CHANGE_OP_ACC_REINVITE_CALLS

RegProgressParam regInfo¶

Registration information.

This is only available when the operation is PJSUA_IP_CHANGE_OP_ACC_UPDATE_CONTACT

struct OnMediaEventParam¶

#include <endpoint.hpp>

Parameter of Endpoint::onCallMediaEvent() callback.

Public Members

MediaEvent ev¶: The media event.

struct OnNatCheckStunServersCompleteParam

#include <endpoint.hpp>

Argument to Endpoint::onNatCheckStunServersComplete() callback.

Public Members

Token userData¶: Arbitrary user data that was passed to Endpoint::natCheckStunServers() function.

pj_status_t status¶: This will contain PJ_SUCCESS if at least one usable STUN server is found, otherwise it will contain the last error code during the operation.

string name¶

The server name that yields successful result.

This will only contain value if status is successful.

SocketAddress addr¶

The server IP address and port in “IP:port” format.

This will only contain value if status is successful.

struct OnNatDetectionCompleteParam

#include <endpoint.hpp>

Argument to Endpoint::onNatDetectionComplete() callback.

Public Members

pj_status_t status¶

Status of the detection process.

If this value is not PJ_SUCCESS, the detection has failed and nat_type field will contain PJ_STUN_NAT_TYPE_UNKNOWN.

string reason¶: The text describing the status, if the status is not PJ_SUCCESS.

pj_stun_nat_type natType¶

This contains the NAT type as detected by the detection procedure.

This value is only valid when the status is PJ_SUCCESS.

string natTypeName¶: Text describing that NAT type.

struct OnSelectAccountParam

#include <endpoint.hpp>

Parameter of Endpoint::onSelectAccount() callback.

Public Members

SipRxData rdata¶: The incoming request.

int accountIndex¶

The account index to be used to handle the request.

Upon entry, this will be filled by the account index chosen by the library. Application may change it to another value to use another account.

struct OnTimerParam

#include <endpoint.hpp>

Parameter of Endpoint::onTimer() callback.

Public Members

Token userData¶: Arbitrary user data that was passed to Endpoint::utilTimerSchedule() function.

unsigned msecDelay¶: The interval of this timer, in miliseconds.

struct OnTransportStateParam

#include <endpoint.hpp>

Parameter of Endpoint::onTransportState() callback.

Public Members

TransportHandle hnd¶: The transport handle.

string type¶: The transport type.

pjsip_transport_state state¶: Transport current state.

pj_status_t lastError¶: The last error code related to the transport state.

TlsInfo tlsInfo¶

TLS transport info, only used if transport type is TLS.

Use TlsInfo.isEmpty() to check if this info is available.

struct PendingJob

Public Functions

virtual void execute(bool is_pending) = 0¶: Perform the job.

virtual ~PendingJob()¶: Virtual destructor.

struct RegProgressParam¶

#include <endpoint.hpp>

Information of Update contact on IP change progress.

Public Members

bool isRegister¶: Indicate if this is a Register or Un-Register message.

int code¶: SIP status code received.

struct SslCertInfo¶

#include <endpoint.hpp>

SSL certificate information.

Public Functions

SslCertInfo()¶: Constructor.

bool isEmpty() const¶

Check if the info is set with empty values.

Return: True if the info is empty.

void fromPj(const pj_ssl_cert_info &info)¶: Convert from pjsip.

Public Members

unsigned version¶: Certificate version

unsigned char serialNo[20]¶: Serial number, array of octets, first index is MSB

string subjectCn¶: Subject common name

string subjectInfo¶: One line subject, fields are separated by slash, e.g: “CN=sample.org/OU=HRD”.

string issuerCn¶: Issuer common name

string issuerInfo¶: One line subject, fields are separated by slash.

TimeVal validityStart¶: Validity start

TimeVal validityEnd¶: Validity end

bool validityGmt¶: Flag if validity date/time use GMT

SslCertNameVector subjectAltName¶: Subject alternative name extension

string raw¶: Raw certificate in PEM format, only available for remote certificate.

Private Members

bool empty¶

struct SslCertName¶

#include <endpoint.hpp>

SSL certificate type and name structure.

Public Functions

SslCertName()¶: Default constructor.

Public Members

pj_ssl_cert_name_type type¶: Name type

string name¶: The name

struct TlsInfo¶

#include <endpoint.hpp>

TLS transport information.

Public Functions

TlsInfo()¶: Constructor.

bool isEmpty() const¶

Check if the info is set with empty values.

Return: True if the info is empty.

void fromPj(const pjsip_tls_state_info &info)¶: Convert from pjsip.

Public Members

bool established¶: Describes whether secure socket connection is established, i.e: TLS/SSL handshaking has been done successfully.

unsigned protocol¶

Describes secure socket protocol being used, see #pj_ssl_sock_proto.

Use bitwise OR operation to combine the protocol type.

pj_ssl_cipher cipher¶: Describes cipher suite being used, this will only be set when connection is established.

string cipherName¶: Describes cipher name being used, this will only be set when connection is established.

SocketAddress localAddr¶: Describes local address.

SocketAddress remoteAddr¶: Describes remote address.

SslCertInfo localCertInfo¶

Describes active local certificate info.

Use SslCertInfo.isEmpty() to check if the local cert info is available.

SslCertInfo remoteCertInfo¶

Describes active remote certificate info.

Use SslCertInfo.isEmpty() to check if the remote cert info is available.

unsigned verifyStatus¶: Status of peer certificate verification.

StringVector verifyMsgs¶: Error messages (if any) of peer certificate verification, based on the field verifyStatus above.

Private Members

bool empty¶

struct UaConfig : public pj::PersistentObject

#include <endpoint.hpp>

SIP User Agent related settings.

Public Functions

UaConfig()¶: Default constructor to initialize with default values.

void fromPj(const pjsua_config &ua_cfg)¶: Construct from pjsua_config.

pjsua_config toPj() const¶: Export to pjsua_config.

virtual void readObject(const ContainerNode &node)¶

Read this object from a container.

Parameters

node: Container to write values from.

virtual void writeObject(ContainerNode &node) const¶

Write this object to a container.

Parameters

node: Container to write values to.

Public Members

unsigned maxCalls¶

Maximum calls to support (default: 4).

The value specified here must be smaller than the compile time maximum settings PJSUA_MAX_CALLS, which by default is 32. To increase this limit, the library must be recompiled with new PJSUA_MAX_CALLS value.

unsigned threadCnt¶

Number of worker threads.

Normally application will want to have at least one worker thread, unless when it wants to poll the library periodically, which in this case the worker thread can be set to zero.

bool mainThreadOnly¶

When this flag is non-zero, all callbacks that come from thread other than main thread will be posted to the main thread and to be executed by Endpoint::libHandleEvents() function.

This includes the logging callback. Note that this will only work if threadCnt is set to zero and Endpoint::libHandleEvents() is performed by main thread. By default, the main thread is set from the thread that invoke Endpoint::libCreate()

Default: false

StringVector nameserver¶

Array of nameservers to be used by the SIP resolver subsystem.

The order of the name server specifies the priority (first name server will be used first, unless it is not reachable).

StringVector outboundProxies¶

Specify the URL of outbound proxies to visit for all outgoing requests.

The outbound proxies will be used for all accounts, and it will be used to build the route set for outgoing requests. The final route set for outgoing requests will consists of the outbound proxies and the proxy configured in the account.

string userAgent¶

Optional user agent string (default empty).

If it’s empty, no User-Agent header will be sent with outgoing requests.

StringVector stunServer¶

Array of STUN servers to try.

The library will try to resolve and contact each of the STUN server entry until it finds one that is usable. Each entry may be a domain name, host name, IP address, and it may contain an optional port number. For example:

”pjsip.org” (domain name)
”sip.pjsip.org” (host name)
”pjsip.org:33478” (domain name and a non-standard port number)
”10.0.0.1:3478” (IP address and port number)

When nameserver is configured in the pjsua_config.nameserver field, if entry is not an IP address, it will be resolved with DNS SRV resolution first, and it will fallback to use DNS A resolution if this fails. Port number may be specified even if the entry is a domain name, in case the DNS SRV resolution should fallback to a non-standard port.

When nameserver is not configured, entries will be resolved with pj_gethostbyname() if it’s not an IP address. Port number may be specified if the server is not listening in standard STUN port.

bool stunTryIpv6¶

This specifies if the library should try to do an IPv6 resolution of the STUN servers if the IPv4 resolution fails.

It can be useful in an IPv6-only environment, including on NAT64.

Default: FALSE

bool stunIgnoreFailure¶

This specifies if the library startup should ignore failure with the STUN servers.

If this is set to PJ_FALSE, the library will refuse to start if it fails to resolve or contact any of the STUN servers.

Default: TRUE

int natTypeInSdp¶

Support for adding and parsing NAT type in the SDP to assist troubleshooting.

The valid values are:

0: no information will be added in SDP, and parsing is disabled.
1: only the NAT type number is added.
2: add both NAT type number and name.

Default: 1

bool mwiUnsolicitedEnabled¶

Handle unsolicited NOTIFY requests containing message waiting indication (MWI) info.

Unsolicited MWI is incoming NOTIFY requests which are not requested by client with SUBSCRIBE request.

If this is enabled, the library will respond 200/OK to the NOTIFY request and forward the request to Endpoint::onMwiInfo() callback.

account.hpp¶

PJSUA2 Account operations.

namespace pj

PJSUA2 API is inside pj namespace.

Typedefs

typedef std::vector<AuthCredInfo> AuthCredInfoVector¶: Array of SIP credentials.

typedef std::vector<SrtpCrypto> SrtpCryptoVector¶

typedef std::vector<RtcpFbCap> RtcpFbCapVector¶

typedef struct pj::AccountIpChangeConfig AccountIpChangeConfig¶: Account config specific to IP address change.

class Account

#include <account.hpp>

Account.

Public Functions

Account(): Constructor.

virtual ~Account()

Destructor.

Note that if the account is deleted, it will also delete the corresponding account in the PJSUA-LIB.

If application implements a derived class, the derived class should call shutdown() in the beginning stage in its destructor, or alternatively application should call shutdown() before deleting the derived class instance. This is to avoid race condition between the derived class destructor and Account callbacks.

void create(const AccountConfig &cfg, bool make_default = false)

Create the account.

Parameters

cfg: The account config.
make_default: Make this the default account.

void shutdown()

Shutdown the account.

This will initiate unregistration if needed, and delete the corresponding account in the PJSUA-LIB.

Note that application must delete all Buddy instances belong to this account before shutting down the account.

If application implements a derived class, the derived class should call this method in the beginning stage in its destructor, or alternatively application should call this method before deleting the derived class instance. This is to avoid race condition between the derived class destructor and Account callbacks.

void modify(const AccountConfig &cfg)

Modify the account to use the specified account configuration.

Depending on the changes, this may cause unregistration or reregistration on the account.

Parameters

cfg: New account config to be applied to the account.

bool isValid() const

Check if this account is still valid.

Return: True if it is.

void setDefault(): Set this as default account to be used when incoming and outgoing requests don’t match any accounts.

bool isDefault() const

Check if this account is the default account.

Default account will be used for incoming and outgoing requests that don’t match any other accounts.

Return: True if this is the default account.

int getId() const

Get PJSUA-LIB account ID or index associated with this account.

Return: Integer greater than or equal to zero.

AccountInfo getInfo() const

Get account info.

Return: Account info.

void setRegistration(bool renew)

Update registration or perform unregistration.

Application normally only needs to call this function if it wants to manually update the registration or to unregister from the server.

Parameters

renew: If False, this will start unregistration process.

void setOnlineStatus(const PresenceStatus &pres_st)

Set or modify account’s presence online status to be advertised to remote/presence subscribers.

This would trigger the sending of outgoing NOTIFY request if there are server side presence subscription for this account, and/or outgoing PUBLISH if presence publication is enabled for this account.

Parameters

pres_st: Presence online status.

void setTransport(TransportId tp_id)

Lock/bind this account to a specific transport/listener.

Normally application shouldn’t need to do this, as transports will be selected automatically by the library according to the destination.

When account is locked/bound to a specific transport, all outgoing requests from this account will use the specified transport (this includes SIP registration, dialog (call and event subscription), and out-of-dialog requests such as MESSAGE).

Note that transport id may be specified in AccountConfig too.

Parameters

tp_id: The transport ID.

void presNotify(const PresNotifyParam &prm)

Send NOTIFY to inform account presence status or to terminate server side presence subscription.

If application wants to reject the incoming request, it should set the param PresNotifyParam.state to PJSIP_EVSUB_STATE_TERMINATED.

Parameters

prm: The sending NOTIFY parameter.

const BuddyVector &enumBuddies() const

Warning: deprecated, use enumBuddies2() instead.

This function is not safe in multithreaded environment.

Enumerate all buddies of the account.

Return: The buddy list.

BuddyVector2 enumBuddies2() const

Enumerate all buddies of the account.

Return: The buddy list.

Buddy *findBuddy(string uri, FindBuddyMatch *buddy_match = NULL) const

Warning: deprecated, use findBuddy2 instead.

This function is not safe in multithreaded environment.

Find a buddy in the buddy list with the specified URI.

Exception: if buddy is not found, PJ_ENOTFOUND will be thrown.

Return

The pointer to buddy.

Parameters

uri: The buddy URI.
buddy_match: The buddy match algo.

Buddy findBuddy2(string uri) const

Find a buddy in the buddy list with the specified URI.

Exception: if buddy is not found, PJ_ENOTFOUND will be thrown.

Return

The pointer to buddy.

Parameters

uri: The buddy URI.

virtual void onIncomingCall(OnIncomingCallParam &prm)

Notify application on incoming call.

Parameters

prm: Callback parameter.

virtual void onRegStarted(OnRegStartedParam &prm)

Notify application when registration or unregistration has been initiated.

Note that this only notifies the initial registration and unregistration. Once registration session is active, subsequent refresh will not cause this callback to be called.

Parameters

prm: Callback parameter.

virtual void onRegState(OnRegStateParam &prm)

Notify application when registration status has changed.

Application may then query the account info to get the registration details.

Parameters

prm: Callback parameter.

virtual void onIncomingSubscribe(OnIncomingSubscribeParam &prm)

Notification when incoming SUBSCRIBE request is received.

Application may use this callback to authorize the incoming subscribe request (e.g. ask user permission if the request should be granted).

If this callback is not implemented, all incoming presence subscription requests will be accepted.

If this callback is implemented, application has several choices on what to do with the incoming request:

it may reject the request immediately by specifying non-200 class final response in the IncomingSubscribeParam.code parameter.
it may immediately accept the request by specifying 200 as the IncomingSubscribeParam.code parameter. This is the default value if application doesn’t set any value to the IncomingSubscribeParam.code parameter. In this case, the library will automatically send NOTIFY request upon returning from this callback.
it may delay the processing of the request, for example to request user permission whether to accept or reject the request. In this case, the application MUST set the IncomingSubscribeParam.code argument to 202, then IMMEDIATELY calls presNotify() with state PJSIP_EVSUB_STATE_PENDING and later calls presNotify() again to accept or reject the subscription request.

Any IncomingSubscribeParam.code other than 200 and 202 will be treated as 200.

Application MUST return from this callback immediately (e.g. it must not block in this callback while waiting for user confirmation).

Parameters

prm: Callback parameter.

virtual void onInstantMessage(OnInstantMessageParam &prm)

Notify application on incoming instant message or pager (i.e.

MESSAGE request) that was received outside call context.

Parameters

prm: Callback parameter.

virtual void onInstantMessageStatus(OnInstantMessageStatusParam &prm)

Notify application about the delivery status of outgoing pager/instant message (i.e.

MESSAGE) request.

Parameters

prm: Callback parameter.

virtual void onTypingIndication(OnTypingIndicationParam &prm)

Notify application about typing indication.

Parameters

prm: Callback parameter.

virtual void onMwiInfo(OnMwiInfoParam &prm)

Notification about MWI (Message Waiting Indication) status change.

This callback can be called upon the status change of the SUBSCRIBE request (for example, 202/Accepted to SUBSCRIBE is received) or when a NOTIFY reqeust is received.

Parameters

prm: Callback parameter.

Public Static Functions

static Account *lookup(int acc_id)

Get the Account class for the specified account Id.

Return

The Account instance or NULL if not found.

Parameters

acc_id: The account ID to lookup

Private Functions

void addBuddy(Buddy *buddy)¶

An internal function to add a Buddy to Account buddy list.

This method is used by Buddy::create().

void removeBuddy(Buddy *buddy)¶

An internal function to remove a Buddy from Account buddy list.

This method is used by Buddy::~Buddy().

Private Members

pjsua_acc_id id¶

string tmpReason¶

BuddyVector buddyList¶

Friends

friend pj::Endpoint

friend pj::Buddy

struct AccountCallConfig : public pj::PersistentObject

#include <account.hpp>

Account’s call settings.

This will be specified in AccountConfig.

Public Functions

AccountCallConfig()¶: Default constructor.

virtual void readObject(const ContainerNode &node)¶

Read this object from a container node.

Parameters

node: Container to read values from.

virtual void writeObject(ContainerNode &node) const¶

Write this object to a container node.

Parameters

node: Container to write values to.

Public Members

pjsua_call_hold_type holdType¶

Specify how to offer call hold to remote peer.

Please see the documentation on pjsua_call_hold_type for more info.

Default: PJSUA_CALL_HOLD_TYPE_DEFAULT

pjsua_100rel_use prackUse¶

Specify how support for reliable provisional response (100rel/ PRACK) should be used for all sessions in this account.

See the documentation of pjsua_100rel_use enumeration for more info.

Default: PJSUA_100REL_NOT_USED

pjsua_sip_timer_use timerUse¶

Specify the usage of Session Timers for all sessions.

See the pjsua_sip_timer_use for possible values.

Default: PJSUA_SIP_TIMER_OPTIONAL

unsigned timerMinSESec¶

Specify minimum Session Timer expiration period, in seconds.

Must not be lower than 90. Default is 90.

unsigned timerSessExpiresSec¶

Specify Session Timer expiration period, in seconds.

Must not be lower than timerMinSE. Default is 1800.

struct AccountConfig : public pj::PersistentObject

#include <account.hpp>

Account configuration.

Public Functions

AccountConfig()¶: Default constructor will initialize with default values.

void toPj(pjsua_acc_config &cfg) const¶

This will return a temporary pjsua_acc_config instance, which contents are only valid as long as this AccountConfig structure remains valid AND no modifications are done to it AND no further toPj() function call is made.

Any call to toPj() function will invalidate the content of temporary pjsua_acc_config that was returned by the previous call.

void fromPj(const pjsua_acc_config &prm, const pjsua_media_config *mcfg)¶: Initialize from pjsip.

virtual void readObject(const ContainerNode &node)¶

Read this object from a container node.

Parameters

node: Container to read values from.

virtual void writeObject(ContainerNode &node) const¶

Write this object to a container node.

Parameters

node: Container to write values to.

Public Members

int priority¶

Account priority, which is used to control the order of matching incoming/outgoing requests.

The higher the number means the higher the priority is, and the account will be matched first.

string idUri¶

The Address of Record or AOR, that is full SIP URL that identifies the account.

The value can take name address or URL format, and will look something like “sip:account@serviceprovider”.

This field is mandatory.

AccountRegConfig regConfig¶: Registration settings.

AccountSipConfig sipConfig¶: SIP settings.

AccountCallConfig callConfig¶: Call settings.

AccountPresConfig presConfig¶: Presence settings.

AccountMwiConfig mwiConfig¶: MWI (Message Waiting Indication) settings.

AccountNatConfig natConfig¶: NAT settings.

AccountMediaConfig mediaConfig¶: Media settings (applicable for both audio and video).

AccountVideoConfig videoConfig¶: Video settings.

AccountIpChangeConfig ipChangeConfig¶: IP Change settings.

struct AccountInfo

#include <account.hpp>

Account information.

Application can query the account information by calling Account::getInfo().

Public Functions

AccountInfo()¶: Default constructor.

void fromPj(const pjsua_acc_info &pai)¶: Import from pjsip data.

Public Members

pjsua_acc_id id¶: The account ID.

bool isDefault¶: Flag to indicate whether this is the default account.

string uri¶: Account URI.

bool regIsConfigured¶: Flag to tell whether this account has registration setting (reg_uri is not empty).

bool regIsActive¶: Flag to tell whether this account is currently registered (has active registration session).

unsigned regExpiresSec¶: An up to date expiration interval for account registration session.

pjsip_status_code regStatus¶

Last registration status code.

If status code is zero, the account is currently not registered. Any other value indicates the SIP status code of the registration.

string regStatusText¶: String describing the registration status.

pj_status_t regLastErr¶

Last registration error code.

When the status field contains a SIP status code that indicates a registration failure, last registration error code contains the error code that causes the failure. In any other case, its value is zero.

bool onlineStatus¶: Presence online status for this account.

string onlineStatusText¶: Presence online status text.

struct AccountIpChangeConfig

#include <account.hpp>

Account config specific to IP address change.

Public Functions

virtual ~AccountIpChangeConfig()¶: Virtual destructor.

virtual void readObject(const ContainerNode &node)¶

Read this object from a container node.

Parameters

node: Container to read values from.

virtual void writeObject(ContainerNode &node) const¶

Write this object to a container node.

Parameters

node: Container to write values to.

Public Members

bool shutdownTp¶

Shutdown the transport used for account registration.

If this is set to PJ_TRUE, the transport will be shutdown altough it’s used by multiple account. Shutdown transport will be followed by re-Registration if AccountConfig.natConfig.contactRewriteUse is enabled.

Default: true

bool hangupCalls¶

Hangup active calls associated with the acount.

If this is set to true, then the calls will be hang up.

Default: false

unsigned reinviteFlags¶

Specify the call flags used in the re-INVITE when hangupCalls is set to false.

If this is set to 0, no re-INVITE will be sent. The re-INVITE will be sent after re-Registration is finished.

Default: PJSUA_CALL_REINIT_MEDIA | PJSUA_CALL_UPDATE_CONTACT | PJSUA_CALL_UPDATE_VIA

struct AccountMediaConfig : public pj::PersistentObject

#include <account.hpp>

Account media config (applicable for both audio and video).

This will be specified in AccountConfig.

Public Functions

AccountMediaConfig()¶: Default constructor.

virtual void readObject(const ContainerNode &node)¶

Read this object from a container node.

Parameters

node: Container to read values from.

virtual void writeObject(ContainerNode &node) const¶

Write this object to a container node.

Parameters

node: Container to write values to.

Public Members

TransportConfig transportConfig¶: Media transport (RTP) configuration.

bool lockCodecEnabled¶

If remote sends SDP answer containing more than one format or codec in the media line, send re-INVITE or UPDATE with just one codec to lock which codec to use.

Default: True (Yes).

bool streamKaEnabled¶

Specify whether stream keep-alive and NAT hole punching with non-codec-VAD mechanism (see PJMEDIA_STREAM_ENABLE_KA) is enabled for this account.

Default: False

pjmedia_srtp_use srtpUse¶

Specify whether secure media transport should be used for this account.

Valid values are PJMEDIA_SRTP_DISABLED, PJMEDIA_SRTP_OPTIONAL, and PJMEDIA_SRTP_MANDATORY.

Default: PJSUA_DEFAULT_USE_SRTP

int srtpSecureSignaling¶

Specify whether SRTP requires secure signaling to be used.

This option is only used when use_srtp option above is non-zero.

Valid values are: 0: SRTP does not require secure signaling 1: SRTP requires secure transport such as TLS 2: SRTP requires secure end-to-end transport (SIPS)

Default: PJSUA_DEFAULT_SRTP_SECURE_SIGNALING

SrtpOpt srtpOpt¶: Specify SRTP settings, like cryptos and keying methods.

pjsua_ipv6_use ipv6Use¶

Specify whether IPv6 should be used on media.

Default is not used.

bool rtcpMuxEnabled¶: Enable RTP and RTCP multiplexing.

RtcpFbConfig rtcpFbConfig¶: RTCP Feedback settings.

struct AccountMwiConfig : public pj::PersistentObject

#include <account.hpp>

Account MWI (Message Waiting Indication) settings.

This will be specified in AccountConfig.

Public Functions

virtual void readObject(const ContainerNode &node)¶

Read this object from a container node.

Parameters

node: Container to read values from.

virtual void writeObject(ContainerNode &node) const¶

Write this object to a container node.

Parameters

node: Container to write values to.

Public Members

bool enabled¶

Subscribe to message waiting indication events (RFC 3842).

See also UaConfig.mwiUnsolicitedEnabled setting.

Default: FALSE

unsigned expirationSec¶

Specify the default expiration time (in seconds) for Message Waiting Indication (RFC 3842) event subscription.

This must not be zero.

Default: PJSIP_MWI_DEFAULT_EXPIRES (3600)

struct AccountNatConfig : public pj::PersistentObject

#include <account.hpp>

Account’s NAT (Network Address Translation) settings.

This will be specified in AccountConfig.

Public Functions

AccountNatConfig()¶: Default constructor.

virtual void readObject(const ContainerNode &node)¶

Read this object from a container node.

Parameters

node: Container to read values from.

virtual void writeObject(ContainerNode &node) const¶

Write this object to a container node.

Parameters

node: Container to write values to.

Public Members

pjsua_stun_use sipStunUse¶

Control the use of STUN for the SIP signaling.

Default: PJSUA_STUN_USE_DEFAULT

pjsua_stun_use mediaStunUse¶

Control the use of STUN for the media transports.

Default: PJSUA_STUN_USE_DEFAULT

pjsua_nat64_opt nat64Opt¶

Specify NAT64 options.

Default: PJSUA_NAT64_DISABLED

bool iceEnabled¶

Enable ICE for the media transport.

Default: False

int iceMaxHostCands¶

Set the maximum number of ICE host candidates.

Default: -1 (maximum not set)

bool iceAggressiveNomination¶

Specify whether to use aggressive nomination.

Default: True

unsigned iceNominatedCheckDelayMsec¶

For controlling agent if it uses regular nomination, specify the delay to perform nominated check (connectivity check with USE-CANDIDATE attribute) after all components have a valid pair.

Default value is PJ_ICE_NOMINATED_CHECK_DELAY.

int iceWaitNominationTimeoutMsec¶

For a controlled agent, specify how long it wants to wait (in milliseconds) for the controlling agent to complete sending connectivity check with nominated flag set to true for all components after the controlled agent has found that all connectivity checks in its checklist have been completed and there is at least one successful (but not nominated) check for every component.

Default value for this option is ICE_CONTROLLED_AGENT_WAIT_NOMINATION_TIMEOUT. Specify -1 to disable this timer.

bool iceNoRtcp¶

Disable RTCP component.

Default: False

bool iceAlwaysUpdate¶

Always send re-INVITE/UPDATE after ICE negotiation regardless of whether the default ICE transport address is changed or not.

When this is set to False, re-INVITE/UPDATE will be sent only when the default ICE transport address is changed.

Default: yes

bool turnEnabled¶: Enable TURN candidate in ICE.

string turnServer¶: Specify TURN domain name or host name, in in “DOMAIN:PORT” or “HOST:PORT” format.

pj_turn_tp_type turnConnType¶

Specify the connection type to be used to the TURN server.

Valid values are PJ_TURN_TP_UDP or PJ_TURN_TP_TCP.

Default: PJ_TURN_TP_UDP

string turnUserName¶: Specify the username to authenticate with the TURN server.

int turnPasswordType¶

Specify the type of password.

Currently this must be zero to indicate plain-text password will be used in the password.

string turnPassword¶: Specify the password to authenticate with the TURN server.

int contactRewriteUse¶

This option is used to update the transport address and the Contact header of REGISTER request.

When this option is enabled, the library will keep track of the public IP address from the response of REGISTER request. Once it detects that the address has changed, it will unregister current Contact, update the Contact with transport address learned from Via header, and register a new Contact to the registrar. This will also update the public name of UDP transport if STUN is configured.

media.hpp¶

PJSUA2 media operations.

namespace pj

PJSUA2 API is inside pj namespace.

Typedefs

typedef std::vector<MediaFormatAudio> MediaFormatAudioVector¶: Array of MediaFormatAudio.

typedef std::vector<MediaFormatVideo> MediaFormatVideoVector¶: Array of MediaFormatVideo.

typedef void *MediaPort¶: Media port, corresponds to pjmedia_port.

typedef std::vector<AudioMedia *> AudioMediaVector¶

Warning: deprecated, use AudioMediaVector2 instead.

Array of Audio Media.

typedef std::vector<AudioMedia> AudioMediaVector2¶: Array of Audio Media.

typedef std::vector<ToneDesc> ToneDescVector¶: Array of tone descriptor.

typedef std::vector<ToneDigit> ToneDigitVector¶: Array of tone digits.

typedef std::vector<ToneDigitMapDigit> ToneDigitMapVector¶: Tone digit map.

typedef std::vector<AudioDevInfo *> AudioDevInfoVector¶

Warning: deprecated, use AudioDevInfoVector2 instead.

Array of audio device info.

typedef std::vector<AudioDevInfo> AudioDevInfoVector2¶: Array of audio device info.

typedef std::vector<VideoMedia> VideoMediaVector¶: Array of Video Media.

typedef struct pj::WindowHandle WindowHandle¶: Window handle.

typedef struct pj::VideoWindowInfo VideoWindowInfo¶: This structure describes video window info.

typedef std::vector<VideoDevInfo *> VideoDevInfoVector¶

Warning: deprecated, use VideoDevInfoVector2 instead.

Array of video device info.

typedef std::vector<VideoDevInfo> VideoDevInfoVector2¶: Array of video device info.

typedef std::vector<CodecInfo *> CodecInfoVector¶

Warning: deprecated, use CodecInfoVector2 instead.

Array of codec info.

typedef std::vector<CodecInfo> CodecInfoVector2¶: Array of codec info.

typedef struct pj::CodecFmtp CodecFmtp¶

Structure of codec specific parameters which contains name=value pairs.

The codec specific parameters are to be used with SDP according to the standards (e.g: RFC 3555) in SDP ‘a=fmtp’ attribute.

typedef std::vector<CodecFmtp> CodecFmtpVector¶: Array of codec fmtp.

typedef union pj::MediaEventData MediaEventData¶: Media event data.

struct AudDevErrorEvent¶

#include <media.hpp>

This structure describes an audio device error event.

Public Members

pjmedia_dir dir¶

The direction.

int id¶

The audio device ID.

pj_status_t status¶

The status code.

class AudDevManager

#include <media.hpp>

Audio device manager.

Public Functions

int getCaptureDev() const

Get currently active capture sound devices.

If sound devices has not been created, it is possible that the function returns -1 as device IDs.

Return: Device ID of the capture device.

AudioMedia &getCaptureDevMedia()

Get the AudioMedia of the capture audio device.

Return: Audio media for the capture device.

int getPlaybackDev() const

Get currently active playback sound devices.

If sound devices has not been created, it is possible that the function returns -1 as device IDs.

Return: Device ID of the playback device.

AudioMedia &getPlaybackDevMedia()

Get the AudioMedia of the speaker/playback audio device.

Return: Audio media for the speaker/playback device.

void setCaptureDev(int capture_dev) const

Select or change capture sound device.

Application may call this function at any time to replace current sound device. Calling this method will not change the state of the sound device (opened/closed). Note that this method will override the mode set by setSndDevMode().

Parameters

capture_dev: Device ID of the capture device.

void setPlaybackDev(int playback_dev) const

Select or change playback sound device.

Parameters

playback_dev: Device ID of the playback device.

const AudioDevInfoVector &enumDev()

Warning: deprecated, use enumDev2 instead.

This function is not safe in multithreaded environment.

Enum all audio devices installed in the system. This function is not safe in multithreaded environment.

Return: The list of audio device info.

AudioDevInfoVector2 enumDev2() const

Enum all audio devices installed in the system.

Return: The list of audio device info.

void setNullDev()

Set pjsua to use null sound device.

The null sound device only provides the timing needed by the conference bridge, and will not interract with any hardware.

MediaPort *setNoDev()

Disconnect the main conference bridge from any sound devices, and let application connect the bridge to it’s own sound device/master port.

Return: The port interface of the conference bridge, so that application can connect this to it’s own sound device or master port.

void setSndDevMode(unsigned mode) const

Set sound device mode.

Parameters

mode: The sound device mode, as bitmask combination of #pjsua_snd_dev_mode

void setEcOptions(unsigned tail_msec, unsigned options)

Change the echo cancellation settings.

The behavior of this function depends on whether the sound device is currently active, and if it is, whether device or software AEC is being used.

If the sound device is currently active, and if the device supports AEC, this function will forward the change request to the device and it will be up to the device on whether support the request. If software AEC is being used (the software EC will be used if the device does not support AEC), this function will change the software EC settings. In all cases, the setting will be saved for future opening of the sound device.

If the sound device is not currently active, this will only change the default AEC settings and the setting will be applied next time the sound device is opened.

Parameters

tail_msec: The tail length, in miliseconds. Set to zero to disable AEC.
options: Options to be passed to pjmedia_echo_create(). Normally the value should be zero.

unsigned getEcTail() const

Get current echo canceller tail length.

Return: The EC tail length in milliseconds, If AEC is disabled, the value will be zero.

bool sndIsActive() const

Check whether the sound device is currently active.

The sound device may be inactive if the application has set the auto close feature to non-zero (the sndAutoCloseTime setting in MediaConfig), or if null sound device or no sound device has been configured via the setNoDev() function.

void refreshDevs()

Refresh the list of sound devices installed in the system.

This method will only refresh the list of audio device so all active audio streams will be unaffected. After refreshing the device list, application MUST make sure to update all index references to audio devices before calling any method that accepts audio device index as its parameter.

unsigned getDevCount() const

Get the number of sound devices installed in the system.

Return: The number of sound devices installed in the system.

AudioDevInfo getDevInfo(int id) const

Get device information.

Return

The device information which will be filled in by this method once it returns successfully.

Parameters

id: The audio device ID.

int lookupDev(const string &drv_name, const string &dev_name) const

Lookup device index based on the driver and device name.

Return

The device ID. If the device is not found, Error will be thrown.

Parameters

drv_name: The driver name.
dev_name: The device name.

string capName(pjmedia_aud_dev_cap cap) const

Get string info for the specified capability.

Return

Capability name.

Parameters

cap: The capability ID.

void setExtFormat(const MediaFormatAudio &format, bool keep = true)

This will configure audio format capability (other than PCM) to the sound device being used.

If sound device is currently active, the method will forward the setting to the sound device instance to be applied immediately, if it supports it.

This method is only valid if the device has PJMEDIA_AUD_DEV_CAP_EXT_FORMAT capability in AudioDevInfo.caps flags, otherwise Error will be thrown.

Note that in case the setting is kept for future use, it will be applied to any devices, even when application has changed the sound device to be used.

Parameters

format: The audio format.
keep: Specify whether the setting is to be kept for future use.

MediaFormatAudio getExtFormat() const

Get the audio format capability (other than PCM) of the sound device being used.

If sound device is currently active, the method will forward the request to the sound device. If sound device is currently inactive, and if application had previously set the setting and mark the setting as kept, then that setting will be returned. Otherwise, this method will raise error.

This method is only valid if the device has PJMEDIA_AUD_DEV_CAP_EXT_FORMAT capability in AudioDevInfo.caps flags, otherwise Error will be thrown.

Return: The audio format.

void setInputLatency(unsigned latency_msec, bool keep = true)

This will configure audio input latency control or query capability to the sound device being used.

If sound device is currently active, the method will forward the setting to the sound device instance to be applied immediately, if it supports it.

This method is only valid if the device has PJMEDIA_AUD_DEV_CAP_INPUT_LATENCY capability in AudioDevInfo.caps flags, otherwise Error will be thrown.

Note that in case the setting is kept for future use, it will be applied to any devices, even when application has changed the sound device to be used.

Parameters

latency_msec: The input latency.
keep: Specify whether the setting is to be kept for future use.

unsigned getInputLatency() const

Get the audio input latency control or query capability of the sound device being used.

This method is only valid if the device has PJMEDIA_AUD_DEV_CAP_INPUT_LATENCY capability in AudioDevInfo.caps flags, otherwise Error will be thrown.

Return: The audio input latency.

void setOutputLatency(unsigned latency_msec, bool keep = true)

This will configure audio output latency control or query capability to the sound device being used.

If sound device is currently active, the method will forward the setting to the sound device instance to be applied immediately, if it supports it.

This method is only valid if the device has PJMEDIA_AUD_DEV_CAP_OUTPUT_LATENCY capability in AudioDevInfo.caps flags, otherwise Error will be thrown.

Note that in case the setting is kept for future use, it will be applied to any devices, even when application has changed the sound device to be used.

Parameters

latency_msec: The output latency.
keep: Specify whether the setting is to be kept for future use.

unsigned getOutputLatency() const

Get the audio output latency control or query capability of the sound device being used.

This method is only valid if the device has PJMEDIA_AUD_DEV_CAP_OUTPUT_LATENCY capability in AudioDevInfo.caps flags, otherwise Error will be thrown.

Return: The audio output latency.

void setInputVolume(unsigned volume, bool keep = true)

This will configure audio input volume level capability to the sound device being used.

If sound device is currently active, the method will forward the setting to the sound device instance to be applied immediately, if it supports it.

This method is only valid if the device has PJMEDIA_AUD_DEV_CAP_INPUT_VOLUME_SETTING capability in AudioDevInfo.caps flags, otherwise Error will be thrown.

Note that in case the setting is kept for future use, it will be applied to any devices, even when application has changed the sound device to be used.

Parameters

volume: The input volume level, in percent.
keep: Specify whether the setting is to be kept for future use.

unsigned getInputVolume() const

Get the audio input volume level capability of the sound device being used.

This method is only valid if the device has PJMEDIA_AUD_DEV_CAP_INPUT_VOLUME_SETTING capability in AudioDevInfo.caps flags, otherwise Error will be thrown. *

Return: The audio input volume level, in percent.

void setOutputVolume(unsigned volume, bool keep = true)

This will configure audio output volume level capability to the sound device being used.

If sound device is currently active, the method will forward the setting to the sound device instance to be applied immediately, if it supports it.

This method is only valid if the device has PJMEDIA_AUD_DEV_CAP_OUTPUT_VOLUME_SETTING capability in AudioDevInfo.caps flags, otherwise Error will be thrown.

Note that in case the setting is kept for future use, it will be applied to any devices, even when application has changed the sound device to be used.

Parameters

volume: The output volume level, in percent.
keep: Specify whether the setting is to be kept for future use.

unsigned getOutputVolume() const

Get the audio output volume level capability of the sound device being used.

This method is only valid if the device has PJMEDIA_AUD_DEV_CAP_OUTPUT_VOLUME_SETTING capability in AudioDevInfo.caps flags, otherwise Error will be thrown.

Return: The audio output volume level, in percent.

unsigned getInputSignal() const

Get the audio input signal level capability of the sound device being used.

This method is only valid if the device has PJMEDIA_AUD_DEV_CAP_INPUT_SIGNAL_METER capability in AudioDevInfo.caps flags, otherwise Error will be thrown.

Return: The audio input signal level, in percent.

unsigned getOutputSignal() const

Get the audio output signal level capability of the sound device being used.

This method is only valid if the device has PJMEDIA_AUD_DEV_CAP_OUTPUT_SIGNAL_METER capability in AudioDevInfo.caps flags, otherwise Error will be thrown.

Return: The audio output signal level, in percent.

void setInputRoute(pjmedia_aud_dev_route route, bool keep = true)

This will configure audio input route capability to the sound device being used.

If sound device is currently active, the method will forward the setting to the sound device instance to be applied immediately, if it supports it.

This method is only valid if the device has PJMEDIA_AUD_DEV_CAP_INPUT_ROUTE capability in AudioDevInfo.caps flags, otherwise Error will be thrown.

Note that in case the setting is kept for future use, it will be applied to any devices, even when application has changed the sound device to be used.

Parameters

route: The audio input route.
keep: Specify whether the setting is to be kept for future use.

pjmedia_aud_dev_route getInputRoute() const

Get the audio input route capability of the sound device being used.

This method is only valid if the device has PJMEDIA_AUD_DEV_CAP_INPUT_ROUTE capability in AudioDevInfo.caps flags, otherwise Error will be thrown.

Return: The audio input route.

void setOutputRoute(pjmedia_aud_dev_route route, bool keep = true)

This will configure audio output route capability to the sound device being used.

If sound device is currently active, the method will forward the setting to the sound device instance to be applied immediately, if it supports it.

This method is only valid if the device has PJMEDIA_AUD_DEV_CAP_OUTPUT_ROUTE capability in AudioDevInfo.caps flags, otherwise Error will be thrown.

Note that in case the setting is kept for future use, it will be applied to any devices, even when application has changed the sound device to be used.

Parameters

route: The audio output route.
keep: Specify whether the setting is to be kept for future use.

pjmedia_aud_dev_route getOutputRoute() const

Get the audio output route capability of the sound device being used.

This method is only valid if the device has PJMEDIA_AUD_DEV_CAP_OUTPUT_ROUTE capability in AudioDevInfo.caps flags, otherwise Error will be thrown.

Return: The audio output route.

void setVad(bool enable, bool keep = true)

This will configure audio voice activity detection capability to the sound device being used.

If sound device is currently active, the method will forward the setting to the sound device instance to be applied immediately, if it supports it.

This method is only valid if the device has PJMEDIA_AUD_DEV_CAP_VAD capability in AudioDevInfo.caps flags, otherwise Error will be thrown.

Note that in case the setting is kept for future use, it will be applied to any devices, even when application has changed the sound device to be used.

Parameters

enable: Enable/disable voice activity detection feature. Set true to enable.
keep: Specify whether the setting is to be kept for future use.

bool getVad() const

Get the audio voice activity detection capability of the sound device being used.

This method is only valid if the device has PJMEDIA_AUD_DEV_CAP_VAD capability in AudioDevInfo.caps flags, otherwise Error will be thrown.

Return: The audio voice activity detection feature.

void setCng(bool enable, bool keep = true)

This will configure audio comfort noise generation capability to the sound device being used.

If sound device is currently active, the method will forward the setting to the sound device instance to be applied immediately, if it supports it.

This method is only valid if the device has PJMEDIA_AUD_DEV_CAP_CNG capability in AudioDevInfo.caps flags, otherwise Error will be thrown.

Note that in case the setting is kept for future use, it will be applied to any devices, even when application has changed the sound device to be used.

Parameters

enable: Enable/disable comfort noise generation feature. Set true to enable.
keep: Specify whether the setting is to be kept for future use.

bool getCng() const

Get the audio comfort noise generation capability of the sound device being used.

This method is only valid if the device has PJMEDIA_AUD_DEV_CAP_CNG capability in AudioDevInfo.caps flags, otherwise Error will be thrown.

Return: The audio comfort noise generation feature.

void setPlc(bool enable, bool keep = true)

This will configure audio packet loss concealment capability to the sound device being used.

If sound device is currently active, the method will forward the setting to the sound device instance to be applied immediately, if it supports it.

This method is only valid if the device has PJMEDIA_AUD_DEV_CAP_PLC capability in AudioDevInfo.caps flags, otherwise Error will be thrown.

Note that in case the setting is kept for future use, it will be applied to any devices, even when application has changed the sound device to be used.

Parameters

enable: Enable/disable packet loss concealment feature. Set true to enable.
keep: Specify whether the setting is to be kept for future use.

bool getPlc() const

Get the audio packet loss concealment capability of the sound device being used.

This method is only valid if the device has PJMEDIA_AUD_DEV_CAP_PLC capability in AudioDevInfo.caps flags, otherwise Error will be thrown.

Return: The audio packet loss concealment feature.

Private Functions

AudDevManager()¶: Constructor.

~AudDevManager()¶: Destructor.

void clearAudioDevList()¶

int getActiveDev(bool is_capture) const¶

Private Members

AudioDevInfoVector audioDevList¶

AudioMedia *devMedia¶

Friends

friend pj::Endpoint

struct AudioDevInfo

#include <media.hpp>

Audio device information structure.

Public Functions

void fromPj(const pjmedia_aud_dev_info &dev_info)¶: Construct from pjmedia_aud_dev_info.

~AudioDevInfo()¶: Destructor.

Public Members

string name¶: The device name.

unsigned inputCount¶

Maximum number of input channels supported by this device.

If the value is zero, the device does not support input operation (i.e. it is a playback only device).

unsigned outputCount¶

Maximum number of output channels supported by this device.

If the value is zero, the device does not support output operation (i.e. it is an input only device).

unsigned defaultSamplesPerSec¶: Default sampling rate.

string driver¶: The underlying driver name.

unsigned caps¶: Device capabilities, as bitmask combination of pjmedia_aud_dev_cap.

unsigned routes¶

Supported audio device routes, as bitmask combination of pjmedia_aud_dev_route.

The value may be zero if the device does not support audio routing.

MediaFormatAudioVector extFmt¶: Array of supported extended audio formats.

class AudioMedia : public pj::Media

#include <media.hpp>

Audio Media.

This is a lite wrapper class for audio conference bridge port, i.e: this class only maintains one data member, conference slot ID, and the methods are simply proxies for conference bridge operations.

Application can create a derived class and use registerMediaPort2()/ unregisterMediaPort() to register/unregister a media port to/from the conference bridge.

The library will not keep a list of AudioMedia instances, so any AudioMedia (descendant) instances instantiated by application must be maintained and destroyed by the application itself.

Note that any PJSUA2 APIs that return AudioMedia instance(s) such as Endpoint::mediaEnumPorts2() or Call::getAudioMedia() will just return generated copy. All AudioMedia methods should work normally on this generated copy instance.

Subclassed by pj::AudioMediaPlayer, pj::AudioMediaRecorder, pj::ExtraAudioDevice, pj::ToneGenerator

Public Functions

ConfPortInfo getPortInfo() const: Get information about the specified conference port.

int getPortId() const: Get port Id.

void startTransmit(const AudioMedia &sink) const

Establish unidirectional media flow to sink.

This media port will act as a source, and it may transmit to multiple destinations/sink. And if multiple sources are transmitting to the same sink, the media will be mixed together. Source and sink may refer to the same Media, effectively looping the media.

If bidirectional media flow is desired, application needs to call this method twice, with the second one called from the opposite source media.

Parameters

sink: The destination Media.

void startTransmit2(const AudioMedia &sink, const AudioMediaTransmitParam &param) const

Establish unidirectional media flow to sink.

Signal level from this source to the sink can be adjusted by making it louder or quieter via the parameter param. The level adjustment will apply to a specific connection only (i.e. only for signal from this source to the sink), as compared to adjustTxLevel()/adjustRxLevel() which applies to all signals from/to this media port. The signal adjustment will be cumulative, in this following order: signal from this source will be adjusted with the level specified in adjustTxLevel(), then with the level specified via this API, and finally with the level specified to the sink’s adjustRxLevel().

If bidirectional media flow is desired, application needs to call this method twice, with the second one called from the opposite source media.

Parameters

sink: The destination Media.
param: The parameter.

void stopTransmit(const AudioMedia &sink) const

Stop media flow to destination/sink port.

Parameters

sink: The destination media.

void adjustRxLevel(float level)

Adjust the signal level to be transmitted from the bridge to this media port by making it louder or quieter.

Parameters

level: Signal level adjustment. Value 1.0 means no level adjustment, while value 0 means to mute the port.

void adjustTxLevel(float level)

Adjust the signal level to be received from this media port (to the bridge) by making it louder or quieter.

Parameters

level: Signal level adjustment. Value 1.0 means no level adjustment, while value 0 means to mute the port.

unsigned getRxLevel() const

Get the last received signal level.

Return: Signal level in percent.

unsigned getTxLevel() const

Get the last transmitted signal level.

Return: Signal level in percent.

AudioMedia()

Default Constructor.

Normally application will not create AudioMedia object directly, but it instantiates an AudioMedia derived class. This is set as public because some STL vector implementations require it.

virtual ~AudioMedia(): Virtual Destructor.

Public Static Functions

static ConfPortInfo getPortInfoFromId(int port_id): Get information from specific port id.

static AudioMedia *typecastFromMedia(Media *media)

Warning: deprecated and will be removed in future release.

Typecast from base class Media. This is useful for application written in language that does not support downcasting such as Python.

Return

The object as AudioMedia instance

Parameters

media: The object to be downcasted

Protected Functions

void registerMediaPort(MediaPort port)¶

Warning: deprecated and will be removed in future release, use registerMediaPort2() instead.

This method needs to be called by descendants of this class to register the media port created to the conference bridge and Endpoint’s media list.

param port The media port to be registered to the conference bridge.

void registerMediaPort2(MediaPort port, pj_pool_t *pool)¶

This method needs to be called by descendants of this class to register the media port created to the conference bridge and Endpoint’s media list.

param port The media port to be registered to the conference bridge. param pool The memory pool.

void unregisterMediaPort()¶

This method needs to be called by descendants of this class to remove the media port from the conference bridge and Endpoint’s media list.

Descendant should only call this method if it has registered the media with the previous call to registerMediaPort().

Protected Attributes

int id¶: Conference port Id.

Private Members

pj_caching_pool mediaCachingPool¶

pj_pool_t *mediaPool¶

class AudioMediaPlayer : public pj::AudioMedia

#include <media.hpp>

Audio Media Player.

Public Functions

AudioMediaPlayer(): Constructor.

void createPlayer(const string &file_name, unsigned options = 0)

Create a file player, and automatically add this player to the conference bridge.

Parameters

file_name: The filename to be played. Currently only WAV files are supported, and the WAV file MUST be formatted as 16bit PCM mono/single channel (any clock rate is supported).
options: Optional option flag. Application may specify PJMEDIA_FILE_NO_LOOP to prevent playback loop.

void createPlaylist(const StringVector &file_names, const string &label = "", unsigned options = 0)

Create a file playlist media port, and automatically add the port to the conference bridge.

Parameters

file_names: Array of file names to be added to the play list. Note that the files must have the same clock rate, number of channels, and number of bits per sample.
label: Optional label to be set for the media port.
options: Optional option flag. Application may specify PJMEDIA_FILE_NO_LOOP to prevent looping.

AudioMediaPlayerInfo getInfo() const

Get additional info about the player.

This operation is only valid for player. For playlist, Error will be thrown.

Return: the info.

pj_uint32_t getPos() const

Get current playback position in samples.

This operation is not valid for playlist.

Return: Current playback position, in samples.

void setPos(pj_uint32_t samples)

Set playback position in samples.

This operation is not valid for playlist.

Parameters

samples: The desired playback position, in samples.

virtual ~AudioMediaPlayer()

Destructor.

This will unregister the player port from the conference bridge.

virtual void onEof2()

Register a callback to be called when the file player reading has reached the end of file, or when the file reading has reached the end of file of the last file for a playlist.

If the file or playlist is set to play repeatedly, then the callback will be called multiple times.

If application wishes to stop the playback, it can stop the media transmission in the callback, and only after all transmissions have been stopped, could the application safely destroy the player.

Public Static Functions

static AudioMediaPlayer *typecastFromAudioMedia(AudioMedia *media)

Warning: deprecated and will be removed in future release.

Typecast from base class AudioMedia. This is useful for application written in language that does not support downcasting such as Python.

Return

The object as AudioMediaPlayer instance

Parameters

media: The object to be downcasted

Private Members

int playerId¶: Player Id.

Private Static Functions

static void eof_cb(pjmedia_port *port, void *usr_data)¶: Low level PJMEDIA callback.

struct AudioMediaPlayerInfo¶

#include <media.hpp>

This structure contains additional info about AudioMediaPlayer.

Public Functions

AudioMediaPlayerInfo()¶: Default constructor.

Public Members

pjmedia_format_id formatId¶: Format ID of the payload.

unsigned payloadBitsPerSample¶

The number of bits per sample of the file payload.

For example, the value is 16 for PCM WAV and 8 for Alaw/Ulas WAV files.

pj_uint32_t sizeBytes¶: The WAV payload size in bytes.

pj_uint32_t sizeSamples¶: The WAV payload size in samples.

class AudioMediaRecorder : public pj::AudioMedia

#include <media.hpp>

Audio Media Recorder.

Public Functions

AudioMediaRecorder(): Constructor.

void createRecorder(const string &file_name, unsigned enc_type = 0, long max_size = 0, unsigned options = 0)

Create a file recorder, and automatically connect this recorder to the conference bridge.

The recorder currently supports recording WAV file. The type of the recorder to use is determined by the extension of the file (e.g. “.wav”).

Parameters

file_name: Output file name. The function will determine the default format to be used based on the file extension. Currently “.wav” is supported on all platforms.
enc_type: Optionally specify the type of encoder to be used to compress the media, if the file can support different encodings. This value must be zero for now.
max_size: Maximum file size. Specify zero or -1 to remove size limitation. This value must be zero or -1 for now.
options: Optional options, which can be used to specify the recording file format. Supported options are PJMEDIA_FILE_WRITE_PCM, PJMEDIA_FILE_WRITE_ALAW, and PJMEDIA_FILE_WRITE_ULAW. Default is zero or PJMEDIA_FILE_WRITE_PCM.

virtual ~AudioMediaRecorder()

Destructor.

This will unregister the recorder port from the conference bridge.

Public Static Functions

static AudioMediaRecorder *typecastFromAudioMedia(AudioMedia *media)

Warning: deprecated and will be removed in future release.

Typecast from base class AudioMedia. This is useful for application written in language that does not support downcasting such as Python.

Return

The object as AudioMediaRecorder instance

Parameters

media: The object to be downcasted

Private Members

int recorderId¶: Recorder Id.

struct AudioMediaTransmitParam¶

#include <media.hpp>

Parameters for AudioMedia::startTransmit2() method.

Public Functions

AudioMediaTransmitParam()¶: Default constructor.

Public Members

float level¶

Signal level adjustment.

Value 1.0 means no level adjustment, while value 0 means to mute the port.

Default: 1.0

struct CodecFmtp

#include <media.hpp>

Structure of codec specific parameters which contains name=value pairs.

The codec specific parameters are to be used with SDP according to the standards (e.g: RFC 3555) in SDP ‘a=fmtp’ attribute.

Public Members

string name¶

string val¶

struct CodecInfo¶

#include <media.hpp>

This structure describes codec information.

Public Functions

void fromPj(const pjsua_codec_info &codec_info)¶: Construct from pjsua_codec_info.

Public Members

string codecId¶: Codec unique identification.

pj_uint8_t priority¶: Codec priority (integer 0-255).

string desc¶: Codec description.

struct CodecOpusConfig¶

#include <media.hpp>

Opus codec parameters setting;.

Public Functions

pjmedia_codec_opus_config toPj() const¶

void fromPj(const pjmedia_codec_opus_config &config)¶

Public Members

unsigned sample_rate¶

Sample rate in Hz.

unsigned channel_cnt¶

Number of channels.

unsigned frm_ptime¶

Frame time in msec.

unsigned bit_rate¶

Encoder bit rate in bps.

unsigned packet_loss¶

Encoder’s expected packet loss pct.

unsigned complexity¶: Encoder complexity, 0-10(10 is highest)

bool cbr¶: Constant bit rate?

struct CodecParam¶

#include <media.hpp>

Detailed codec attributes used in configuring an audio codec and in querying the capability of audio codec factories.

Please note that codec parameter also contains SDP specific setting, #setting::decFmtp and #setting::encFmtp, which may need to be set appropriately based on the effective setting. See each codec documentation for more detail.

Public Functions

void fromPj(const pjmedia_codec_param &param)¶

pjmedia_codec_param toPj() const¶

Public Members

struct CodecParamInfo info¶

struct CodecParamSetting setting¶

struct CodecParamInfo¶

#include <media.hpp>

Audio codec parameters info.

Public Functions

CodecParamInfo()¶: Default constructor.

Public Members

unsigned clockRate¶: Sampling rate in Hz

unsigned channelCnt¶

Channel count.

unsigned avgBps¶: Average bandwidth in bits/sec

unsigned maxBps¶: Maximum bandwidth in bits/sec

unsigned maxRxFrameSize¶: Maximum frame size

unsigned frameLen¶

Decoder frame ptime in msec.

unsigned pcmBitsPerSample¶: Bits/sample in the PCM side

unsigned pt¶

Payload type.

pjmedia_format_id fmtId¶

Source format, it’s format of encoder input and decoder output.

struct CodecParamSetting¶

#include <media.hpp>

Audio codec parameters setting.

Public Members

unsigned frmPerPkt¶

Number of frames per packet.

bool vad¶

Voice Activity Detector.

bool cng¶

Comfort Noise Generator.

bool penh¶: Perceptual Enhancement

bool plc¶: Packet loss concealment.

bool reserved¶: Reserved, must be zero.

CodecFmtpVector encFmtp¶

Encoder’s fmtp params.

CodecFmtpVector decFmtp¶

Decoder’s fmtp params.

struct ConfPortInfo

#include <media.hpp>

This structure descibes information about a particular media port that has been registered into the conference bridge.

Public Functions

void fromPj(const pjsua_conf_port_info &port_info)¶: Construct from pjsua_conf_port_info.

Public Members

int portId¶: Conference port number.

string name¶: Port name.

MediaFormatAudio format¶: Media audio format information.

float txLevelAdj¶

Tx level adjustment.

Value 1.0 means no adjustment, value 0 means the port is muted, value 2.0 means the level is amplified two times.

float rxLevelAdj¶

Rx level adjustment.

Value 1.0 means no adjustment, value 0 means the port is muted, value 2.0 means the level is amplified two times.

IntVector listeners¶: Array of listeners (in other words, ports where this port is transmitting to).

class ExtraAudioDevice : public pj::AudioMedia ¶

#include <media.hpp>

Extra audio device.

This class allows application to have multiple sound device instances active concurrently.

Application may also use this class to improve media clock. Normally media clock is driven by sound device in master port, but unfortunately some sound devices may produce jittery clock. To improve media clock, application can install Null Sound Device (i.e: using AudDevManager::setNullDev()), which will act as a master port, and install the sound device as extra sound device.

Note that extra sound device will not have auto-close upon idle feature. Also note that the extra sound device only supports mono channel.

Public Functions

ExtraAudioDevice(int playdev, int recdev)¶

Constructor.

Parameters

playdev: Playback device ID.
recdev: Record device ID.

virtual ~ExtraAudioDevice()¶: Destructor.

void open()¶

Open the audio device using format (e.g.

: clock rate, bit per sample, samples per frame) matched to the conference bridge’s format, except the channel count, which will be set to one (mono channel). This will also register the audio device port to conference bridge.

void close()¶: Close the audio device and unregister the audio device port from the conference bridge.

bool isOpened()¶

Is the extra audio device opened?

Return: ’true’ if it is opened.

Protected Attributes

int playDev¶

int recDev¶

void *ext_snd_dev¶

class Media

#include <media.hpp>

Media.

Subclassed by pj::AudioMedia, pj::VideoMedia

Public Functions

virtual ~Media(): Virtual destructor.

pjmedia_type getType() const

Get type of the media.

Return: The media type.

Protected Functions

Media(pjmedia_type med_type)¶: Constructor.

Private Members

pjmedia_type type¶: Media type.

struct MediaCoordinate¶

#include <media.hpp>

Representation of media coordinate.

Public Members

int x¶: X position of the coordinate.

int y¶: Y position of the coordinate.

struct MediaEvent

#include <media.hpp>

This structure describes a media event.

It corresponds to the pjmedia_event structure.

Public Functions

MediaEvent()¶: Default constructor.

void fromPj(const pjmedia_event &ev)¶: Convert from pjsip.

Public Members

pjmedia_event_type type¶: The event type.

MediaEventData data¶

Additional data/parameters about the event.

The type of data will be specific to the event type being reported.

void *pjMediaEvent¶

Pointer to original pjmedia_event.

Only valid when the struct is converted from PJSIP’s pjmedia_event.

union MediaEventData

#include <media.hpp>

Media event data.

Public Members

MediaFmtChangedEvent fmtChanged¶: Media format changed event data.

AudDevErrorEvent audDevError¶: Audio device error event data.

GenericData ptr¶: Pointer to storage to user event data, if it’s outside this struct.

struct MediaFmtChangedEvent

#include <media.hpp>

This structure describes a media format changed event.

Public Members

unsigned newWidth¶

The new width.

unsigned newHeight¶

The new height.

struct MediaFormat

#include <media.hpp>

This structure contains all the information needed to completely describe a media.

Subclassed by pj::MediaFormatAudio, pj::MediaFormatVideo

Public Functions

MediaFormat()¶: Default constructor.

Public Members

pj_uint32_t id¶

The format id that specifies the audio sample or video pixel format.

Some well known formats ids are declared in pjmedia_format_id enumeration.

See: pjmedia_format_id

pjmedia_type type¶: The top-most type of the media, as an information.

struct MediaFormatAudio : public pj::MediaFormat

#include <media.hpp>

This structure describe detail information about an audio media.

Public Functions

void fromPj(const pjmedia_format &format)¶: Construct from pjmedia_format.

pjmedia_format toPj() const¶: Export to pjmedia_format.

Public Members

unsigned clockRate¶: Audio clock rate in samples or Hz.

unsigned channelCount¶

Number of channels.

unsigned frameTimeUsec¶

Frame interval, in microseconds.

unsigned bitsPerSample¶

Number of bits per sample.

pj_uint32_t avgBps¶: Average bitrate

pj_uint32_t maxBps¶: Maximum bitrate

struct MediaFormatVideo : public pj::MediaFormat

#include <media.hpp>

This structure describe detail information about an video media.

Public Functions

void fromPj(const pjmedia_format &format)¶: Construct from pjmedia_format.

pjmedia_format toPj() const¶: Export to pjmedia_format.

Public Members

unsigned width¶

Video width.

unsigned height¶

Video height.

int fpsNum¶

Frames per second numerator.

int fpsDenum¶

Frames per second denumerator.

pj_uint32_t avgBps¶

Average bitrate.

pj_uint32_t maxBps¶

Maximum bitrate.

struct MediaSize¶

#include <media.hpp>

Representation of media size.

Public Members

unsigned w¶

The width.

unsigned h¶

The height.

class ToneDesc : public pjmedia_tone_desc¶

#include <media.hpp>

Tone descriptor (abstraction for pjmedia_tone_desc)

Public Functions

ToneDesc()¶

~ToneDesc()¶

class ToneDigit : public pjmedia_tone_digit¶

#include <media.hpp>

Tone digit (abstraction for pjmedia_tone_digit)

Public Functions

ToneDigit()¶

~ToneDigit()¶

struct ToneDigitMapDigit¶

#include <media.hpp>

A digit in tone digit map.

Public Members

string digit¶

int freq1¶

int freq2¶

class ToneGenerator : public pj::AudioMedia ¶

#include <media.hpp>

Tone generator.

Public Functions

ToneGenerator()¶: Constructor.

~ToneGenerator()¶

Destructor.

This will unregister the tone generator port from the conference bridge.

void createToneGenerator(unsigned clock_rate = 16000, unsigned channel_count = 1)¶: Create tone generator and register the port to the conference bridge.

bool isBusy() const¶

Check if the tone generator is still busy producing some tones.

Return: Non-zero if busy.

void stop()¶: Instruct the tone generator to stop current processing.

void rewind()¶

Rewind the playback.

This will start the playback to the first tone in the playback list.

void play(const ToneDescVector &tones, bool loop = false)¶

Instruct the tone generator to play single or dual frequency tones with the specified duration.

The new tones will be appended to currently playing tones, unless stop() is called before calling this function. The playback will begin as soon as the tone generator is connected to other media.

Parameters

tones: Array of tones to be played.
loop: Play the tone in a loop.

void playDigits(const ToneDigitVector &digits, bool loop = false)¶

Instruct the tone generator to play multiple MF digits with each of the digits having individual ON/OFF duration.

Each of the digit in the digit array must have the corresponding descriptor in the digit map. The new tones will be appended to currently playing tones, unless stop() is called before calling this function. The playback will begin as soon as the tone generator is connected to a sink media.

Parameters

digits: Array of MF digits.
loop: Play the tone in a loop.

ToneDigitMapVector getDigitMap() const¶

Get the digit-map currently used by this tone generator.

Return: The digitmap currently used by the tone generator

void setDigitMap(const ToneDigitMapVector &digit_map)¶

Set digit map to be used by the tone generator.

Parameters

digit_map: Digitmap to be used by the tone generator.

Private Members

pj_pool_t *pool¶

pjmedia_port *tonegen¶

pjmedia_tone_digit_map digitMap¶

struct VidCodecParam¶

#include <media.hpp>

Detailed codec attributes used in configuring a video codec and in querying the capability of video codec factories.

Please note that codec parameter also contains SDP specific setting, decFmtp and encFmtp, which may need to be set appropriately based on the effective setting. See each codec documentation for more detail.

Public Functions

VidCodecParam()¶: Default constructor.

void fromPj(const pjmedia_vid_codec_param &param)¶

pjmedia_vid_codec_param toPj() const¶

Public Members

pjmedia_dir dir¶: Direction

pjmedia_vid_packing packing¶

Packetization strategy.

struct MediaFormatVideo encFmt¶: Encoded format

CodecFmtpVector encFmtp¶: Encoder fmtp params

unsigned encMtu¶: MTU or max payload size setting.

struct MediaFormatVideo decFmt¶: Decoded format

CodecFmtpVector decFmtp¶: Decoder fmtp params

bool ignoreFmtp¶

Ignore fmtp params.

If set to true, the codec will apply format settings specified in encFmt and decFmt only.

struct VidConfPortInfo¶

#include <media.hpp>

This structure descibes information about a particular media port that has been registered into the conference bridge.

Public Functions

void fromPj(const pjsua_vid_conf_port_info &port_info)¶: Construct from pjsua_conf_port_info.

Public Members

int portId¶: Conference port number.

string name¶: Port name.

MediaFormatVideo format¶: Media audio format information.

IntVector listeners¶: Array of listeners (in other words, ports where this port is transmitting to).

IntVector transmitters¶: Array of listeners (in other words, ports where this port is listening to).

class VidDevManager¶

#include <media.hpp>

Video device manager.

Public Functions

void refreshDevs()¶

Refresh the list of video devices installed in the system.

This function will only refresh the list of video device so all active video streams will be unaffected. After refreshing the device list, application MUST make sure to update all index references to video devices (i.e. all variables of type pjmedia_vid_dev_index) before calling any function that accepts video device index as its parameter.

unsigned getDevCount()¶

Get the number of video devices installed in the system.

Return: The number of devices.

VideoDevInfo getDevInfo(int dev_id) const¶

Retrieve the video device info for the specified device index.

Return

The list of video device info

Parameters

dev_id: The video device id

const VideoDevInfoVector &enumDev()¶

Warning: deprecated, use enumDev2() instead.

This function is not safe in multithreaded environment.

Enum all video devices installed in the system.

Return: The list of video device info

VideoDevInfoVector2 enumDev2() const¶

Enum all video devices installed in the system.

Return: The list of video device info

int lookupDev(const string &drv_name, const string &dev_name) const¶

Lookup device index based on the driver and device name.

Return

The device ID. If the device is not found, Error will be thrown.

Parameters

drv_name: The driver name.
dev_name: The device name.

string capName(pjmedia_vid_dev_cap cap) const¶

Get string info for the specified capability.

Return

Capability name.

Parameters

cap: The capability ID.

void setFormat(int dev_id, const MediaFormatVideo &format, bool keep)¶

This will configure video format capability to the video device.

If video device is currently active, the method will forward the setting to the video device instance to be applied immediately, if it supports it.

This method is only valid if the device has PJMEDIA_VID_DEV_CAP_FORMAT capability in VideoDevInfo.caps flags, otherwise Error will be thrown.

Note that in case the setting is kept for future use, it will be applied to any devices, even when application has changed the video device to be used.

Parameters

dev_id: The video device id.
format: The video format.
keep: Specify whether the setting is to be kept for future use.

MediaFormatVideo getFormat(int dev_id) const¶

Get the video format capability to the video device.

If video device is currently active, the method will forward the request to the video device. If video device is currently inactive, and if application had previously set the setting and mark the setting as kept, then that setting will be returned. Otherwise, this method will raise error.

This method is only valid if the device has PJMEDIA_VID_DEV_CAP_FORMAT capability in VideoDevInfo.caps flags, otherwise Error will be thrown.

Return

keep The video format.

Parameters

dev_id: The video device id.

void setInputScale(int dev_id, const MediaSize &scale, bool keep)¶

This will configure video format capability to the video device.

If video device is currently active, the method will forward the setting to the video device instance to be applied immediately, if it supports it.

This method is only valid if the device has PJMEDIA_VID_DEV_CAP_INPUT_SCALE capability in VideoDevInfo.caps flags, otherwise Error will be thrown.

Note that in case the setting is kept for future use, it will be applied to any devices, even when application has changed the video device to be used.

Parameters

dev_id: The video device id.
scale: The video scale.
keep: Specify whether the setting is to be kept for future use.

MediaSize getInputScale(int dev_id) const¶

Get the video input scale capability to the video device.

This method is only valid if the device has PJMEDIA_VID_DEV_CAP_FORMAT capability in VideoDevInfo.caps flags, otherwise Error will be thrown.

Return

keep The video format.

Parameters

dev_id: The video device id.

void setOutputWindowFlags(int dev_id, int flags, bool keep)¶

This will configure fast switching to another video device.

If video device is currently active, the method will forward the setting to the video device instance to be applied immediately, if it supports it.

This method is only valid if the device has PJMEDIA_VID_DEV_CAP_OUTPUT_WINDOW_FLAGS capability in VideoDevInfo.caps flags, otherwise Error will be thrown.

Note that in case the setting is kept for future use, it will be applied to any devices, even when application has changed the video device to be used.

Parameters

dev_id: The video device id.
flags: The video window flag.
keep: Specify whether the setting is to be kept for future use.

int getOutputWindowFlags(int dev_id)¶

Get the window output flags capability to the video device.

This method is only valid if the device has PJMEDIA_VID_DEV_CAP_OUTPUT_WINDOW_FLAGS capability in VideoDevInfo.caps flags, otherwise Error will be thrown.

Return

keep The video format.

Parameters

dev_id: The video device id.

void switchDev(int dev_id, const VideoSwitchParam &param)¶

This will configure fast switching to another video device.

If video device is currently active, the method will forward the setting to the video device instance to be applied immediately, if it supports it.

This method is only valid if the device has PJMEDIA_VID_DEV_CAP_SWITCH capability in VideoDevInfo.caps flags, otherwise Error will be thrown.

Parameters

dev_id: The video device id.
param: The video switch param.

bool isCaptureActive(int dev_id) const¶

Check whether the video capture device is currently active, i.e.

if a video preview has been started or there is a video call using the device.

Return

True if it’s active.

Parameters

dev_id: The video device id

void setCaptureOrient(pjmedia_vid_dev_index dev_id, pjmedia_orient orient, bool keep = true)¶

This will configure video orientation of the video capture device.

If the device is currently active (i.e. if there is a video call using the device or a video preview has been started), the method will forward the setting to the video device instance to be applied immediately, if it supports it.

The setting will be saved for future opening of the video device, if the “keep” argument is set to true. If the video device is currently inactive, and the “keep” argument is false, this method will throw Error.

Parameters

dev_id: The video device id
orient: The video orientation.
keep: Specify whether the setting is to be kept for future use.

Private Functions

void clearVideoDevList()¶

VidDevManager()¶: Constructor.

~VidDevManager()¶: Destructor.

Private Members

VideoDevInfoVector videoDevList¶

Friends

friend pj::Endpoint

struct VideoDevInfo¶

#include <media.hpp>

Video device information structure.

Public Functions

VideoDevInfo()¶: Default constructor.

void fromPj(const pjmedia_vid_dev_info &dev_info)¶: Construct from pjmedia_vid_dev_info.

~VideoDevInfo()¶: Destructor.

Public Members

pjmedia_vid_dev_index id¶: The device ID.

string name¶: The device name.

string driver¶: The underlying driver name.

pjmedia_dir dir¶

The supported direction of the video device, i.e.

whether it supports capture only, render only, or both.

unsigned caps¶: Device capabilities, as bitmask combination of #pjmedia_vid_dev_cap.

MediaFormatVideoVector fmt¶

Array of supported video formats.

Some fields in each supported video format may be set to zero or of “unknown” value, to indicate that the value is unknown or should be ignored. When these value are not set to zero, it indicates that the exact format combination is being used.

class VideoMedia : public pj::Media ¶

#include <media.hpp>

Video Media.

Public Functions

VidConfPortInfo getPortInfo() const¶: Get information about the specified conference port.

int getPortId() const¶: Get port Id.

void startTransmit(const VideoMedia &sink, const VideoMediaTransmitParam &param) const¶

Establish unidirectional media flow to sink.

If bidirectional media flow is desired, application needs to call this method twice, with the second one called from the opposite source media.

Parameters

sink: The destination Media.
param: The parameter.

void stopTransmit(const VideoMedia &sink) const¶

Stop media flow to destination/sink port.

Parameters

sink: The destination media.

VideoMedia()¶

Default Constructor.

Normally application will not create VideoMedia object directly, but it instantiates a VideoMedia derived class. This is set as public because some STL vector implementations require it.

virtual ~VideoMedia()¶: Virtual Destructor.

Public Static Functions

static VidConfPortInfo getPortInfoFromId(int port_id)¶: Get information from specific port id.

Protected Functions

void registerMediaPort(MediaPort port, pj_pool_t *pool)¶

This method needs to be called by descendants of this class to register the media port created to the conference bridge and Endpoint’s media list.

param port The media port to be registered to the conference bridge. param pool The memory pool.

void unregisterMediaPort()¶

This method needs to be called by descendants of this class to remove the media port from the conference bridge and Endpoint’s media list.

Descendant should only call this method if it has registered the media with the previous call to registerMediaPort().

Protected Attributes

int id¶: Conference port Id.

struct VideoMediaTransmitParam¶: #include <media.hpp>
Parameters for VideoMedia::startTransmit() method.

class VideoPreview¶

#include <media.hpp>

Video Preview.

Public Functions

VideoPreview(int dev_id)¶: Constructor.

bool hasNative()¶

Determine if the specified video input device has built-in native preview capability.

This is a convenience function that is equal to querying device’s capability for PJMEDIA_VID_DEV_CAP_INPUT_PREVIEW capability.

Return: true if it has.

void start(const VideoPreviewOpParam &param)¶

Start video preview window for the specified capture device.

Parameters

p: Video preview parameters.

void stop()¶: Stop video preview.

VideoWindow getVideoWindow()¶

VideoMedia getVideoMedia()¶

Get video media or conference bridge port of the video capture device.

Return: Video media of the video capture device.

Private Members

pjmedia_vid_dev_index devId¶

struct VideoPreviewOpParam¶

#include <media.hpp>

This structure contains parameters for VideoPreview::start()

Public Functions

VideoPreviewOpParam()¶: Default constructor initializes with default values.

void fromPj(const pjsua_vid_preview_param &prm)¶: Convert from pjsip.

pjsua_vid_preview_param toPj() const¶: Convert to pjsip.

Public Members

pjmedia_vid_dev_index rendId¶

Device ID for the video renderer to be used for rendering the capture stream for preview.

This parameter is ignored if native preview is being used.

Default: PJMEDIA_VID_DEFAULT_RENDER_DEV

bool show¶

Show window initially.

Default: PJ_TRUE.

unsigned windowFlags¶

Window flags.

The value is a bitmask combination of pjmedia_vid_dev_wnd_flag.

Default: 0.

MediaFormat format¶

Media format.

If left unitialized, this parameter will not be used.

VideoWindowHandle window¶

Optional output window to be used to display the video preview.

This parameter will only be used if the video device supports PJMEDIA_VID_DEV_CAP_OUTPUT_WINDOW capability and the capability is not read-only.

struct VideoSwitchParam¶

#include <media.hpp>

Parameter for switching device with PJMEDIA_VID_DEV_CAP_SWITCH capability.

Public Members

pjmedia_vid_dev_index target_id¶

Target device ID to switch to.

Once the switching is successful, the video stream will use this device and the old device will be closed.

class VideoWindow¶

#include <media.hpp>

Video window.

Public Functions

VideoWindow(int win_id)¶: Constructor.

VideoWindowInfo getInfo() const¶

Get window info.

Return: video window info.

VideoMedia getVideoMedia()¶

Get video media or conference bridge port of the renderer of this video window.

Return: Video media of this renderer window.

void Show(bool show)¶

Show or hide window.

This operation is not valid for native windows (VideoWindowInfo.isNative=true), on which native windowing API must be used instead.

Parameters

show: Set to true to show the window, false to hide the window.

void setPos(const MediaCoordinate &pos)¶

Set video window position.

This operation is not valid for native windows (VideoWindowInfo.isNative=true), on which native windowing API must be used instead.

Parameters

pos: The window position.

void setSize(const MediaSize &size)¶

Resize window.

This operation is not valid for native windows (VideoWindowInfo.isNative=true), on which native windowing API must be used instead.

Parameters

size: The new window size.

void rotate(int angle)¶

Rotate the video window.

This function will change the video orientation and also possibly the video window size (width and height get swapped). This operation is not valid for native windows (VideoWindowInfo.isNative =true), on which native windowing API must be used instead.

Parameters

angle: The rotation angle in degrees, must be multiple of 90. Specify positive value for clockwise rotation or negative value for counter-clockwise rotation.

void setWindow(const VideoWindowHandle &win)¶

Set output window.

This operation is valid only when the underlying video device supports PJMEDIA_VIDEO_DEV_CAP_OUTPUT_WINDOW capability AND allows the output window to be changed on-the-fly, otherwise Error will be thrown. Currently it is only supported on Android.

Parameters

win: The new output window.

void setFullScreen(bool enabled)¶

Set video window full-screen.

This operation is valid only when the underlying video device supports PJMEDIA_VID_DEV_CAP_OUTPUT_FULLSCREEN capability. Currently it is only supported on SDL backend.

Parameters

enabled: Set to true if full screen is desired, false otherwise.

Private Members

pjsua_vid_win_id winId¶

struct VideoWindowHandle¶

#include <media.hpp>

Video window handle.

Public Members

pjmedia_vid_dev_hwnd_type type¶: The window handle type.

WindowHandle handle¶: The window handle.

struct VideoWindowInfo

#include <media.hpp>

This structure describes video window info.

Public Members

bool isNative¶

Flag to indicate whether this window is a native window, such as created by built-in preview device.

If this field is true, only the video window handle field of this structure is valid.

VideoWindowHandle winHandle¶: Video window handle.

int renderDeviceId¶: Renderer device ID.

bool show¶

Window show status.

The window is hidden if false.

MediaCoordinate pos¶: Window position.

MediaSize size¶: Window size.

struct WindowHandle

#include <media.hpp>

Window handle.

Public Members

void *window¶: Window

void *display¶: Display.

call.hpp¶

PJSUA2 Call manipulation.

namespace pj

PJSUA2 API is inside pj namespace.

Typedefs

typedef void *MediaStream¶: Media stream, corresponds to pjmedia_stream.

typedef void *MediaTransport¶: Media transport, corresponds to pjmedia_transport.

typedef std::vector<CallMediaInfo> CallMediaInfoVector¶: Array of call media info.

class Call

#include <call.hpp>

Call.

Public Functions

Call(Account &acc, int call_id = PJSUA_INVALID_ID): Constructor.

virtual ~Call(): Destructor.

CallInfo getInfo() const

Obtain detail information about this call.

Return: Call info.

bool isActive() const

Check if this call has active INVITE session and the INVITE session has not been disconnected.

Return: True if call is active.

int getId() const

Get PJSUA-LIB call ID or index associated with this call.

Return: Integer greater than or equal to zero.

bool hasMedia() const

Check if call has an active media session.

Return: True if yes.

Media *getMedia(unsigned med_idx) const

Warning: deprecated, use getAudioMedia() instead.

This function is not safe in multithreaded environment.

Get media for the specified media index.

Return

The media or NULL if invalid or inactive.

Parameters

med_idx: Media index.

AudioMedia getAudioMedia(int med_idx) const

Get audio media for the specified media index.

If the specified media index is not audio or invalid or inactive, exception will be thrown.

Return

The audio media.

Parameters

med_idx: Media index, or -1 to specify any first audio media registered in the conference bridge.

VideoMedia getEncodingVideoMedia(int med_idx) const

Get video media in encoding direction for the specified media index.

If the specified media index is not video or invalid or the direction is receive only, exception will be thrown.

Return

The video media.

Parameters

med_idx: Media index, or -1 to specify any first video media with encoding direction registered in the conference bridge.

VideoMedia getDecodingVideoMedia(int med_idx) const

Get video media in decoding direction for the specified media index.

If the specified media index is not video or invalid or the direction is send only, exception will be thrown.

Return

The video media.

Parameters

med_idx: Media index, or -1 to specify any first video media with decoding direction registered in the conference bridge.

pjsip_dialog_cap_status remoteHasCap(int htype, const string &hname, const string &token) const

Check if remote peer support the specified capability.

Return

PJSIP_DIALOG_CAP_SUPPORTED if the specified capability is explicitly supported, see pjsip_dialog_cap_status for more info.

Parameters

htype: The header type (pjsip_hdr_e) to be checked, which value may be:
- PJSIP_H_ACCEPT
- PJSIP_H_ALLOW
- PJSIP_H_SUPPORTED
hname: If htype specifies PJSIP_H_OTHER, then the header name must be supplied in this argument. Otherwise the value must be set to empty string (“”).
token: The capability token to check. For example, if htype is PJSIP_H_ALLOW, then token specifies the method names; if htype is PJSIP_H_SUPPORTED, then token specifies the extension names such as “100rel”.

void setUserData(Token user_data)

Attach application specific data to the call.

Application can then inspect this data by calling getUserData().

Parameters

user_data: Arbitrary data to be attached to the call.

Token getUserData() const

Get user data attached to the call, which has been previously set with setUserData().

Return: The user data.

pj_stun_nat_type getRemNatType()

Get the NAT type of remote’s endpoint.

This is a proprietary feature of PJSUA-LIB which sends its NAT type in the SDP when natTypeInSdp is set in UaConfig.

This function can only be called after SDP has been received from remote, which means for incoming call, this function can be called as soon as call is received as long as incoming call contains SDP, and for outgoing call, this function can be called only after SDP is received (normally in 200/OK response to INVITE). As a general case, application should call this function after or in onCallMediaState() callback.

Return: The NAT type.
See: Endpoint::natGetType(), natTypeInSdp

void makeCall(const string &dst_uri, const CallOpParam &prm)

Make outgoing call to the specified URI.

Parameters

dst_uri: URI to be put in the To header (normally is the same as the target URI).
prm.opt: Optional call setting.
prm.txOption: Optional headers etc to be added to outgoing INVITE request.

void answer(const CallOpParam &prm)

Send response to incoming INVITE request with call setting param.

Depending on the status code specified as parameter, this function may send provisional response, establish the call, or terminate the call. Notes about call setting:

if call setting is changed in the subsequent call to this function, only the first call setting supplied will applied. So normally application will not supply call setting before getting confirmation from the user.
if no call setting is supplied when SDP has to be sent, i.e: answer with status code 183 or 2xx, the default call setting will be used, check CallSetting for its default values.

Parameters

prm.opt: Optional call setting.
prm.statusCode: Status code, (100-699).
prm.reason: Optional reason phrase. If empty, default text will be used.
prm.txOption: Optional list of headers etc to be added to outgoing response message. Note that this message data will be persistent in all next answers/responses for this INVITE request.

void hangup(const CallOpParam &prm)

Hangup call by using method that is appropriate according to the call state.

This function is different than answering the call with 3xx-6xx response (with answer()), in that this function will hangup the call regardless of the state and role of the call, while answer() only works with incoming calls on EARLY state.

Parameters

prm.statusCode: Optional status code to be sent when we’re rejecting incoming call. If the value is zero, “603/Decline” will be sent.
prm.reason: Optional reason phrase to be sent when we’re rejecting incoming call. If empty, default text will be used.
prm.txOption: Optional list of headers etc to be added to outgoing request/response message.

void setHold(const CallOpParam &prm)

Put the specified call on hold.

This will send re-INVITE with the appropriate SDP to inform remote that the call is being put on hold. The final status of the request itself will be reported on the onCallMediaState() callback, which inform the application that the media state of the call has changed.

Parameters

prm.options: Bitmask of pjsua_call_flag constants. Currently, only the flag PJSUA_CALL_UPDATE_CONTACT can be used.
prm.txOption: Optional message components to be sent with the request.

void reinvite(const CallOpParam &prm)

Send re-INVITE.

The final status of the request itself will be reported on the onCallMediaState() callback, which inform the application that the media state of the call has changed.

Parameters

prm.opt: Optional call setting, if empty, the current call setting will remain unchanged.
prm.opt.flag: Bitmask of pjsua_call_flag constants. Specifying PJSUA_CALL_UNHOLD here will release call hold.
prm.txOption: Optional message components to be sent with the request.

void update(const CallOpParam &prm)

Send UPDATE request.

Parameters

prm.opt: Optional call setting, if empty, the current call setting will remain unchanged.
prm.txOption: Optional message components to be sent with the request.

void xfer(const string &dest, const CallOpParam &prm)

Initiate call transfer to the specified address.

This function will send REFER request to instruct remote call party to initiate a new INVITE session to the specified destination/target.

If application is interested to monitor the successfulness and the progress of the transfer request, it can implement onCallTransferStatus() callback which will report the progress of the call transfer request.

Parameters

dest: URI of new target to be contacted. The URI may be in name address or addr-spec format.
prm.txOption: Optional message components to be sent with the request.

void xferReplaces(const Call &dest_call, const CallOpParam &prm)

Initiate attended call transfer.

This function will send REFER request to instruct remote call party to initiate new INVITE session to the URL of destCall. The party at dest_call then should “replace” the call with us with the new call from the REFER recipient.

Parameters

dest_call: The call to be replaced.
prm.options: Application may specify PJSUA_XFER_NO_REQUIRE_REPLACES to suppress the inclusion of “Require: replaces” in the outgoing INVITE request created by the REFER request.
prm.txOption: Optional message components to be sent with the request.

void processRedirect(pjsip_redirect_op cmd)

Accept or reject redirection response.

Application MUST call this function after it signaled PJSIP_REDIRECT_PENDING in the onCallRedirected() callback, to notify the call whether to accept or reject the redirection to the current target. Application can use the combination of PJSIP_REDIRECT_PENDING command in onCallRedirected() callback and this function to ask for user permission before redirecting the call.

Note that if the application chooses to reject or stop redirection (by using PJSIP_REDIRECT_REJECT or PJSIP_REDIRECT_STOP respectively), the call disconnection callback will be called before this function returns. And if the application rejects the target, the onCallRedirected() callback may also be called before this function returns if there is another target to try.

Parameters

cmd: Redirection operation to be applied to the current target. The semantic of this argument is similar to the description in the onCallRedirected() callback, except that the PJSIP_REDIRECT_PENDING is not accepted here.

void dialDtmf(const string &digits)

Send DTMF digits to remote using RFC 2833 payload formats.

Parameters

digits: DTMF string digits to be sent.

void sendDtmf(const CallSendDtmfParam &param)

Send DTMF digits to remote.

Parameters

param: The send DTMF parameter.

void sendInstantMessage(const SendInstantMessageParam &prm)

Send instant messaging inside INVITE session.

Parameters

prm.contentType: MIME type.
prm.content: The message content.
prm.txOption: Optional list of headers etc to be included in outgoing request. The body descriptor in the txOption is ignored.
prm.userData: Optional user data, which will be given back when the IM callback is called.

void sendTypingIndication(const SendTypingIndicationParam &prm)

Send IM typing indication inside INVITE session.

Parameters

prm.isTyping: True to indicate to remote that local person is currently typing an IM.
prm.txOption: Optional list of headers etc to be included in outgoing request.

void sendRequest(const CallSendRequestParam &prm)

Send arbitrary request with the call.

This is useful for example to send INFO request. Note that application should not use this function to send requests which would change the invite session’s state, such as re-INVITE, UPDATE, PRACK, and BYE.

Parameters

prm.method: SIP method of the request.
prm.txOption: Optional message body and/or list of headers to be included in outgoing request.

string dump(bool with_media, const string indent)

Dump call and media statistics to string.

Return

Call dump and media statistics string.

Parameters

with_media: True to include media information too.
indent: Spaces for left indentation.

int vidGetStreamIdx() const

Get the media stream index of the default video stream in the call.

Typically this will just retrieve the stream index of the first activated video stream in the call. If none is active, it will return the first inactive video stream.

Return: The media stream index or -1 if no video stream is present in the call.

bool vidStreamIsRunning(int med_idx, pjmedia_dir dir) const

Determine if video stream for the specified call is currently running (i.e.

has been created, started, and not being paused) for the specified direction.

Return

True if stream is currently running for the specified direction.

Parameters

med_idx: Media stream index, or -1 to specify default video media.
dir: The direction to be checked.

void vidSetStream(pjsua_call_vid_strm_op op, const CallVidSetStreamParam &param)

Add, remove, modify, and/or manipulate video media stream for the specified call.

This may trigger a re-INVITE or UPDATE to be sent for the call.

Parameters

op: The video stream operation to be performed, possible values are pjsua_call_vid_strm_op.
param: The parameters for the video stream operation (see CallVidSetStreamParam).

StreamInfo getStreamInfo(unsigned med_idx) const

Get media stream info for the specified media index.

Return

The stream info.

Parameters

med_idx: Media stream index.

StreamStat getStreamStat(unsigned med_idx) const

Get media stream statistic for the specified media index.

Return

The stream statistic.

Parameters

med_idx: Media stream index.

MediaTransportInfo getMedTransportInfo(unsigned med_idx) const

Get media transport info for the specified media index.

Return

The transport info.

Parameters

med_idx: Media stream index.

void processMediaUpdate(OnCallMediaStateParam &prm): Internal function (callled by Endpoint( to process update to call medias when call media state changes.

void processStateChange(OnCallStateParam &prm): Internal function (called by Endpoint) to process call state change.

virtual void onCallState(OnCallStateParam &prm)

Notify application when call state has changed.

Application may then query the call info to get the detail call states by calling getInfo() function.

Parameters

prm: Callback parameter.

virtual void onCallTsxState(OnCallTsxStateParam &prm)

This is a general notification callback which is called whenever a transaction within the call has changed state.

Application can implement this callback for example to monitor the state of outgoing requests, or to answer unhandled incoming requests (such as INFO) with a final response.

Parameters

prm: Callback parameter.

virtual void onCallMediaState(OnCallMediaStateParam &prm)

Notify application when media state in the call has changed.

Normal application would need to implement this callback, e.g. to connect the call’s media to sound device. When ICE is used, this callback will also be called to report ICE negotiation failure.

Parameters

prm: Callback parameter.

virtual void onCallSdpCreated(OnCallSdpCreatedParam &prm)

Notify application when a call has just created a local SDP (for initial or subsequent SDP offer/answer).

Application can implement this callback to modify the SDP, before it is being sent and/or negotiated with remote SDP, for example to apply per account/call basis codecs priority or to add custom/proprietary SDP attributes.

Parameters

prm: Callback parameter.

virtual void onStreamCreated(OnStreamCreatedParam &prm)

Notify application when audio media session is created and before it is registered to the conference bridge.

Application may return different audio media port if it has added media processing port to the stream. This media port then will be added to the conference bridge instead.

Parameters

prm: Callback parameter.

virtual void onStreamDestroyed(OnStreamDestroyedParam &prm)

Notify application when audio media session has been unregistered from the conference bridge and about to be destroyed.

Parameters

prm: Callback parameter.

virtual void onDtmfDigit(OnDtmfDigitParam &prm)

Notify application upon incoming DTMF digits.

Parameters

prm: Callback parameter.

virtual void onCallTransferRequest(OnCallTransferRequestParam &prm)

Notify application on call being transferred (i.e.

REFER is received). Application can decide to accept/reject transfer request by setting the code (default is 202). When this callback is not implemented, the default behavior is to accept the transfer.

If application decides to accept the transfer request, it must also instantiate the new Call object for the transfer operation and return this new Call object to prm.newCall.

If application does not specify new Call object, library will reuse the existing Call object for initiating the new call (to the transfer destination). In this case, any events from both calls (transferred and transferring) will be delivered to the same Call object, where the call ID will be switched back and forth between callbacks. Application must be careful to not destroy the Call object when receiving disconnection event of the transferred call after the transfer process is completed.

Parameters

prm: Callback parameter.

virtual void onCallTransferStatus(OnCallTransferStatusParam &prm)

Notify application of the status of previously sent call transfer request.

Application can monitor the status of the call transfer request, for example to decide whether to terminate existing call.

Parameters

prm: Callback parameter.

virtual void onCallReplaceRequest(OnCallReplaceRequestParam &prm)

Notify application about incoming INVITE with Replaces header.

Application may reject the request by setting non-2xx code.

Parameters

prm: Callback parameter.

virtual void onCallReplaced(OnCallReplacedParam &prm)

Notify application that an existing call has been replaced with a new call.

This happens when PJSUA-API receives incoming INVITE request with Replaces header.

After this callback is called, normally PJSUA-API will disconnect this call and establish a new call. To be able to control the call, e.g: hold, transfer, change media parameters, application must instantiate a new Call object for the new call using call ID specified in prm.newCallId, and return the Call object via prm.newCall.

Parameters

prm: Callback parameter.

virtual void onCallRxOffer(OnCallRxOfferParam &prm)

Notify application when call has received new offer from remote (i.e.

re-INVITE/UPDATE with SDP is received). Application can decide to accept/reject the offer by setting the code (default is 200). If the offer is accepted, application can update the call setting to be applied in the answer. When this callback is not implemented, the default behavior is to accept the offer using current call setting.

Parameters

prm: Callback parameter.

virtual void onCallRxReinvite(OnCallRxReinviteParam &prm)

Notify application when call has received a re-INVITE offer from the peer.

It allows more fine-grained control over the response to a re-INVITE. If application sets async to PJ_TRUE, it can send the reply manually using the function #Call::answer() and setting the SDP answer. Otherwise, by default the re-INVITE will be answered automatically after the callback returns.

Currently, this callback is only called for re-INVITE with SDP, but app should be prepared to handle the case of re-INVITE without SDP.

Remarks: If manually answering at a later timing, application may need to monitor onCallTsxState() callback to check whether the re-INVITE is already answered automatically with 487 due to being cancelled.

Note: onCallRxOffer() will still be called after this callback, but only if prm.async is false and prm.code is 200.

virtual void onCallTxOffer(OnCallTxOfferParam &prm)

Notify application when call has received INVITE with no SDP offer.

Application can update the call setting (e.g: add audio/video), or enable/disable codecs, or update other media session settings from within the callback, however, as mandated by the standard (RFC3261 section 14.2), it must ensure that the update overlaps with the existing media session (in codecs, transports, or other parameters) that require support from the peer, this is to avoid the need for the peer to reject the offer.

When this callback is not implemented, the default behavior is to send SDP offer using current active media session (with all enabled codecs on each media type).

Parameters

prm: Callback parameter.

virtual void onInstantMessage(OnInstantMessageParam &prm)

Notify application on incoming MESSAGE request.

Parameters

prm: Callback parameter.

virtual void onInstantMessageStatus(OnInstantMessageStatusParam &prm)

Notify application about the delivery status of outgoing MESSAGE request.

Parameters

prm: Callback parameter.

virtual void onTypingIndication(OnTypingIndicationParam &prm)

Notify application about typing indication.

Parameters

prm: Callback parameter.

virtual pjsip_redirect_op onCallRedirected(OnCallRedirectedParam &prm)

This callback is called when the call is about to resend the INVITE request to the specified target, following the previously received redirection response.

Application may accept the redirection to the specified target, reject this target only and make the session continue to try the next target in the list if such target exists, stop the whole redirection process altogether and cause the session to be disconnected, or defer the decision to ask for user confirmation.

This callback is optional, the default behavior is to NOT follow the redirection response.

Return

Action to be performed for the target. Set this parameter to one of the value below:

PJSIP_REDIRECT_ACCEPT: immediately accept the redirection. When set, the call will immediately resend INVITE request to the target.
PJSIP_REDIRECT_ACCEPT_REPLACE: immediately accept the redirection and replace the To header with the current target. When set, the call will immediately resend INVITE request to the target.
PJSIP_REDIRECT_REJECT: immediately reject this target. The call will continue retrying with next target if present, or disconnect the call if there is no more target to try.
PJSIP_REDIRECT_STOP: stop the whole redirection process and immediately disconnect the call. The onCallState() callback will be called with PJSIP_INV_STATE_DISCONNECTED state immediately after this callback returns.
PJSIP_REDIRECT_PENDING: set to this value if no decision can be made immediately (for example to request confirmation from user). Application then MUST call processRedirect() to either accept or reject the redirection upon getting user decision.

Parameters

prm: Callback parameter.

virtual void onCallMediaTransportState(OnCallMediaTransportStateParam &prm)

This callback is called when media transport state is changed.

Parameters

prm: Callback parameter.

virtual void onCallMediaEvent(OnCallMediaEventParam &prm)

Notification about media events such as video notifications.

This callback will most likely be called from media threads, thus application must not perform heavy processing in this callback. Especially, application must not destroy the call or media in this callback. If application needs to perform more complex tasks to handle the event, it should post the task to another thread.

Parameters

prm: Callback parameter.

virtual void onCreateMediaTransport(OnCreateMediaTransportParam &prm)

This callback can be used by application to implement custom media transport adapter for the call, or to replace the media transport with something completely new altogether.

This callback is called when a new call is created. The library has created a media transport for the call, and it is provided as the mediaTp argument of this callback. The callback may change it with the instance of media transport to be used by the call.

Parameters

prm: Callback parameter.

virtual void onCreateMediaTransportSrtp(OnCreateMediaTransportSrtpParam &prm)

Warning: deprecated and may be removed in future release.

Application can set SRTP crypto settings (including keys) and keying methods via AccountConfig.mediaConfig.srtpOpt. See also ticket #2100.

This callback is called when SRTP media transport is created. Application can modify the SRTP setting srtpOpt to specify the cryptos and keys which are going to be used. Note that application should not modify the field pjmedia_srtp_setting.close_member_tp and can only modify the field pjmedia_srtp_setting.use for initial INVITE.

Parameters

prm: Callback parameter.

Public Static Functions

static Call *lookup(int call_id)

Get the Call class for the specified call Id.

Return

The Call instance or NULL if not found.

Parameters

call_id: The call ID to lookup

Private Members

Account &acc¶

pjsua_call_id id¶

Token userData¶

std::vector<Media *> medias¶

pj_pool_t *sdp_pool¶

Call *child¶

Friends

friend pj::Endpoint

struct CallInfo

#include <call.hpp>

Call information.

Application can query the call information by calling Call::getInfo().

Public Functions

CallInfo()¶: Default constructor.

void fromPj(const pjsua_call_info &pci)¶: Convert from pjsip.

Public Members

pjsua_call_id id¶: Call identification.

pjsip_role_e role¶: Initial call role (UAC == caller)

pjsua_acc_id accId¶: The account ID where this call belongs.

string localUri¶: Local URI.

string localContact¶: Local Contact.

string remoteUri¶: Remote URI.

string remoteContact¶: Remote contact.

string callIdString¶: Dialog Call-ID string.

CallSetting setting¶: Call setting.

pjsip_inv_state state¶: Call state.

string stateText¶: Text describing the state.

pjsip_status_code lastStatusCode¶: Last status code heard, which can be used as cause code.

string lastReason¶: The reason phrase describing the last status.

CallMediaInfoVector media¶: Array of active media information.

CallMediaInfoVector provMedia¶

Array of provisional media information.

This contains the media info in the provisioning state, that is when the media session is being created/updated (SDP offer/answer is on progress).

TimeVal connectDuration¶: Up-to-date call connected duration (zero when call is not established)

TimeVal totalDuration¶: Total call duration, including set-up time.

bool remOfferer¶: Flag if remote was SDP offerer.

unsigned remAudioCount¶: Number of audio streams offered by remote.

unsigned remVideoCount¶: Number of video streams offered by remote.

struct CallMediaInfo

#include <call.hpp>

Call media information.

Application can query conference bridge port of this media using Call::getAudioMedia() if the media type is audio, or Call::getEncodingVideoMedia()/Call::getDecodingVideoMedia() if the media type is video.

Public Functions

CallMediaInfo()¶: Default constructor.

void fromPj(const pjsua_call_media_info &prm)¶: Convert from pjsip.

Public Members

unsigned index¶: Media index in SDP.

pjmedia_type type¶: Media type.

pjmedia_dir dir¶: Media direction.

pjsua_call_media_status status¶: Call media status.

int audioConfSlot¶

Warning: this is deprecated, application can query conference bridge port of this media using Call::getAudioMedia().

The conference port number for the call. Only valid if the media type is audio.

pjsua_vid_win_id videoIncomingWindowId¶

The window id for incoming video, if any, or PJSUA_INVALID_ID.

Only valid if the media type is video.

VideoWindow videoWindow¶

The video window instance for incoming video.

Only valid if videoIncomingWindowId is not PJSUA_INVALID_ID and the media type is video.

pjmedia_vid_dev_index videoCapDev¶

The video capture device for outgoing transmission, if any, or PJMEDIA_VID_INVALID_DEV.

Only valid if the media type is video.

struct CallOpParam

#include <call.hpp>

This structure contains parameters for Call::answer(), Call::hangup(), Call::reinvite(), Call::update(), Call::xfer(), Call::xferReplaces(), Call::setHold().

Public Functions

CallOpParam(bool useDefaultCallSetting = false)¶

Default constructor initializes with zero/empty values.

Setting useDefaultCallSetting to true will initialize opt with default call setting values.

Public Members

CallSetting opt¶: The call setting.

pjsip_status_code statusCode¶: Status code.

string reason¶: Reason phrase.

unsigned options¶: Options.

SipTxOption txOption¶

List of headers etc to be added to outgoing response message.

Note that this message data will be persistent in all next answers/responses for this INVITE request.

SdpSession sdp¶

SDP answer.

Currently only used for Call::answer().

struct CallSendDtmfParam¶

#include <call.hpp>

This structure contains parameters for Call::sendDtmf()

Public Functions

CallSendDtmfParam()¶

Default constructor initialize with default value.

pjsua_call_send_dtmf_param toPj() const¶: Convert to pjsip.

void fromPj(const pjsua_call_send_dtmf_param &param)¶: Convert from pjsip.

Public Members

pjsua_dtmf_method method¶

The method used to send DTMF.

Default: PJSUA_DTMF_METHOD_RFC2833

unsigned duration¶

The signal duration used for the DTMF.

Default: PJSUA_CALL_SEND_DTMF_DURATION_DEFAULT

string digits¶: The DTMF digits to be sent.

struct CallSendRequestParam

#include <call.hpp>

This structure contains parameters for Call::sendRequest()

Public Functions

CallSendRequestParam()¶: Default constructor initializes with zero/empty values.

Public Members

string method¶: SIP method of the request.

SipTxOption txOption¶: Message body and/or list of headers etc to be included in outgoing request.

struct CallSetting

#include <call.hpp>

Call settings.

Public Functions

CallSetting(bool useDefaultValues = false)¶: Default constructor initializes with empty or default values.

bool isEmpty() const¶

Check if the settings are set with empty values.

Return: True if the settings are empty.

void fromPj(const pjsua_call_setting &prm)¶: Convert from pjsip.

pjsua_call_setting toPj() const¶: Convert to pjsip.

Public Members

unsigned flag¶

Bitmask of pjsua_call_flag constants.

Default: PJSUA_CALL_INCLUDE_DISABLED_MEDIA

unsigned reqKeyframeMethod¶

This flag controls what methods to request keyframe are allowed on the call.

Value is bitmask of pjsua_vid_req_keyframe_method.

Default: PJSUA_VID_REQ_KEYFRAME_SIP_INFO | PJSUA_VID_REQ_KEYFRAME_RTCP_PLI

unsigned audioCount¶

Number of simultaneous active audio streams for this call.

Setting this to zero will disable audio in this call.

Default: 1

unsigned videoCount¶

Number of simultaneous active video streams for this call.

Setting this to zero will disable video in this call.

Default: 1 (if video feature is enabled, otherwise it is zero)

struct CallVidSetStreamParam

#include <call.hpp>

This structure contains parameters for Call::vidSetStream()

Public Functions

CallVidSetStreamParam()¶: Default constructor.

Public Members

int medIdx¶

Specify the media stream index.

This can be set to -1 to denote the default video stream in the call, which is the first active video stream or any first video stream if none is active.

This field is valid for all video stream operations, except PJSUA_CALL_VID_STRM_ADD.

Default: -1 (first active video stream, or any first video stream if none is active)

pjmedia_dir dir¶

Specify the media stream direction.

This field is valid for the following video stream operations: PJSUA_CALL_VID_STRM_ADD and PJSUA_CALL_VID_STRM_CHANGE_DIR.

Default: PJMEDIA_DIR_ENCODING_DECODING

pjmedia_vid_dev_index capDev¶

Specify the video capture device ID.

This can be set to PJMEDIA_VID_DEFAULT_CAPTURE_DEV to specify the default capture device as configured in the account.

This field is valid for the following video stream operations: PJSUA_CALL_VID_STRM_ADD and PJSUA_CALL_VID_STRM_CHANGE_CAP_DEV.

Default: PJMEDIA_VID_DEFAULT_CAPTURE_DEV.

struct JbufState

#include <call.hpp>

This structure describes jitter buffer state.

Public Functions

void fromPj(const pjmedia_jb_state &prm)¶: Convert from pjsip.

Public Members

unsigned frameSize¶

Individual frame size, in bytes.

unsigned minPrefetch¶: Minimum allowed prefetch, in frms.

unsigned maxPrefetch¶: Maximum allowed prefetch, in frms.

unsigned burst¶: Current burst level, in frames

unsigned prefetch¶: Current prefetch value, in frames

unsigned size¶

Current buffer size, in frames.

unsigned avgDelayMsec¶

Average delay, in ms.

unsigned minDelayMsec¶

Minimum delay, in ms.

unsigned maxDelayMsec¶

Maximum delay, in ms.

unsigned devDelayMsec¶: Standard deviation of delay, in ms.

unsigned avgBurst¶

Average burst, in frames.

unsigned lost¶

Number of lost frames.

unsigned discard¶

Number of discarded frames.

unsigned empty¶

Number of empty on GET events.

struct LossType¶

#include <call.hpp>

Types of loss detected.

Public Members

unsigned burst¶: Burst/sequential packet lost detected

unsigned random¶

Random packet lost detected.

struct MathStat

#include <call.hpp>

This structure describes statistics state.

Public Functions

MathStat()¶: Default constructor.

void fromPj(const pj_math_stat &prm)¶: Convert from pjsip.

Public Members

int n¶: number of samples

int max¶: maximum value

int min¶: minimum value

int last¶: last value

int mean¶: mean

struct MediaTransportInfo

#include <call.hpp>

This structure describes media transport informations.

It corresponds to the pjmedia_transport_info structure. The address name field can be empty string if the address in the pjmedia_transport_info is invalid.

Public Functions

void fromPj(const pjmedia_transport_info &info)¶: Convert from pjsip.

Public Members

SocketAddress localRtpName¶: Address to be advertised as the local address for the RTP socket, which does not need to be equal as the bound address (for example, this address can be the address resolved with STUN).

SocketAddress localRtcpName¶: Address to be advertised as the local address for the RTCP socket, which does not need to be equal as the bound address (for example, this address can be the address resolved with STUN).

SocketAddress srcRtpName¶

Remote address where RTP originated from.

This can be empty string if no data is received from the remote.

SocketAddress srcRtcpName¶

Remote address where RTCP originated from.

This can be empty string if no data is recevied from the remote.

struct OnCallMediaEventParam

#include <call.hpp>

This structure contains parameters for Call::onCallMediaEvent() callback.

Public Members

unsigned medIdx¶: The media stream index.

MediaEvent ev¶: The media event.

struct OnCallMediaStateParam: #include <call.hpp>
This structure contains parameters for Call::onCallMediaState() callback.

struct OnCallMediaTransportStateParam

#include <call.hpp>

This structure contains parameters for Call::onCallMediaTransportState() callback.

Public Members

unsigned medIdx¶: The media index.

pjsua_med_tp_st state¶: The media transport state.

pj_status_t status¶: The last error code related to the media transport state.

int sipErrorCode¶: Optional SIP error code.

struct OnCallRedirectedParam

#include <call.hpp>

This structure contains parameters for Call::onCallRedirected() callback.

Public Members

string targetUri¶: The current target to be tried.

SipEvent e¶

The event that caused this callback to be called.

This could be the receipt of 3xx response, or 4xx/5xx response received for the INVITE sent to subsequent targets, or empty (e.type == PJSIP_EVENT_UNKNOWN) if this callback is called from within Call::processRedirect() context.

struct OnCallReplacedParam

#include <call.hpp>

This structure contains parameters for Call::onCallReplaced() callback.

Public Members

pjsua_call_id newCallId¶: The new call id.

Call *newCall¶: New Call derived object instantiated by application.

struct OnCallReplaceRequestParam

#include <call.hpp>

This structure contains parameters for Call::onCallReplaceRequest() callback.

Public Members

SipRxData rdata¶: The incoming INVITE request to replace the call.

pjsip_status_code statusCode¶

Status code to be set by application.

Application should only return a final status (200-699)

string reason¶: Optional status text to be set by application.

CallSetting opt¶: The current call setting, application can update this setting for the call being replaced.

struct OnCallRxOfferParam

#include <call.hpp>

This structure contains parameters for Call::onCallRxOffer() callback.

Public Members

SdpSession offer¶: The new offer received.

pjsip_status_code statusCode¶

Status code to be returned for answering the offer.

On input, it contains status code 200. Currently, valid values are only 200 and 488.

CallSetting opt¶: The current call setting, application can update this setting for answering the offer.

struct OnCallRxReinviteParam¶

#include <call.hpp>

This structure contains parameters for Call::onCallRxReinvite() callback.

Public Members

SdpSession offer¶: The new offer received.

SipRxData rdata¶: The incoming re-INVITE.

bool isAsync¶

On input, it is false.

Set to true if app wants to manually answer the re-INVITE.

pjsip_status_code statusCode¶

Status code to be returned for answering the offer.

On input, it contains status code 200. Currently, valid values are only 200 and 488.

CallSetting opt¶: The current call setting, application can update this setting for answering the offer.

struct OnCallSdpCreatedParam

#include <call.hpp>

This structure contains parameters for Call::onCallSdpCreated() callback.

Public Members

SdpSession sdp¶: The SDP has just been created.

SdpSession remSdp¶: The remote SDP, will be empty if local is SDP offerer.

struct OnCallStateParam

#include <call.hpp>

This structure contains parameters for Call::onCallState() callback.

Public Members

SipEvent e¶: Event which causes the call state to change.

struct OnCallTransferRequestParam

#include <call.hpp>

This structure contains parameters for Call::onCallTransferRequest() callback.

Public Members

string dstUri¶: The destination where the call will be transferred to.

pjsip_status_code statusCode¶

Status code to be returned for the call transfer request.

On input, it contains status code 202.

CallSetting opt¶: The current call setting, application can update this setting for the call being transferred.

Call *newCall¶: New Call derived object instantiated by application when the call transfer is about to be accepted.

struct OnCallTransferStatusParam

#include <call.hpp>

This structure contains parameters for Call::onCallTransferStatus() callback.

Public Members

pjsip_status_code statusCode¶: Status progress of the transfer request.

string reason¶: Status progress reason.

bool finalNotify¶

If true, no further notification will be reported.

The statusCode specified in this callback is the final status.

bool cont¶: Initially will be set to true, application can set this to false if it no longer wants to receive further notification (for example, after it hangs up the call).

struct OnCallTsxStateParam

#include <call.hpp>

This structure contains parameters for Call::onCallTsxState() callback.

Public Members

SipEvent e¶: Transaction event that caused the state change.

struct OnCallTxOfferParam¶

#include <call.hpp>

This structure contains parameters for Call::onCallTxOffer() callback.

Public Members

CallSetting opt¶

The current call setting, application can update this setting for generating the offer.

Note that application should maintain any active media to avoid the need for the peer to reject the offer.

struct OnCreateMediaTransportParam

#include <call.hpp>

This structure contains parameters for Call::onCreateMediaTransport() callback.

Public Members

unsigned mediaIdx¶: The media index in the SDP for which this media transport will be used.

MediaTransport mediaTp¶

The media transport which otherwise will be used by the call has this callback not been implemented.

Application can change this to its own instance of media transport to be used by the call.

unsigned flags¶: Bitmask from pjsua_create_media_transport_flag.

struct OnCreateMediaTransportSrtpParam¶

#include <call.hpp>

This structure contains parameters for Call::onCreateMediaTransportSrtp() callback.

Public Members

unsigned mediaIdx¶: The media index in the SDP for which the SRTP media transport will be used.

pjmedia_srtp_use srtpUse¶

Specify whether secure media transport should be used.

Application can modify this only for initial INVITE. Valid values are PJMEDIA_SRTP_DISABLED, PJMEDIA_SRTP_OPTIONAL, and PJMEDIA_SRTP_MANDATORY.

SrtpCryptoVector cryptos¶: Application can modify this to specify the cryptos and keys which are going to be used.

struct OnDtmfDigitParam

#include <call.hpp>

This structure contains parameters for Call::onDtmfDigit() callback.

Public Members

pjsua_dtmf_method method¶: DTMF sending method.

string digit¶: DTMF ASCII digit.

unsigned duration¶: DTMF signal duration which might be included when sending DTMF using SIP INFO.

struct OnStreamCreatedParam

#include <call.hpp>

This structure contains parameters for Call::onStreamCreated() callback.

Public Members

MediaStream stream¶: Audio media stream, read-only.

unsigned streamIdx¶: Stream index in the audio media session, read-only.

bool destroyPort¶

Specify if PJSUA2 should take ownership of the port returned in the pPort parameter below.

If set to PJ_TRUE, pjmedia_port_destroy() will be called on the port when it is no longer needed.

Default: PJ_FALSE

MediaPort pPort¶

On input, it specifies the audio media port of the stream.

Application may modify this pointer to point to different media port to be registered to the conference bridge.

struct OnStreamDestroyedParam

#include <call.hpp>

This structure contains parameters for Call::onStreamDestroyed() callback.

Public Members

MediaStream stream¶: Audio media stream.

unsigned streamIdx¶: Stream index in the audio media session.

struct RtcpSdes

#include <call.hpp>

RTCP SDES structure.

Public Functions

void fromPj(const pjmedia_rtcp_sdes &prm)¶: Convert from pjsip.

Public Members

string cname¶

RTCP SDES type CNAME.

string name¶

RTCP SDES type NAME.

string email¶

RTCP SDES type EMAIL.

string phone¶

RTCP SDES type PHONE.

string loc¶

RTCP SDES type LOC.

string tool¶

RTCP SDES type TOOL.

string note¶

RTCP SDES type NOTE.

struct RtcpStat

#include <call.hpp>

Bidirectional RTP stream statistics.

Public Functions

void fromPj(const pjmedia_rtcp_stat &prm)¶: Convert from pjsip.

Public Members

TimeVal start¶: Time when session was created

RtcpStreamStat txStat¶

Encoder stream statistics.

RtcpStreamStat rxStat¶

Decoder stream statistics.

MathStat rttUsec¶

Round trip delay statistic.

pj_uint32_t rtpTxLastTs¶

Last TX RTP timestamp.

pj_uint16_t rtpTxLastSeq¶

Last TX RTP sequence.

MathStat rxIpdvUsec¶

Statistics of IP packet delay variation in receiving direction.

It is only used when PJMEDIA_RTCP_STAT_HAS_IPDV is set to non-zero.

MathStat rxRawJitterUsec¶

Statistic of raw jitter in receiving direction.

It is only used when PJMEDIA_RTCP_STAT_HAS_RAW_JITTER is set to non-zero.

RtcpSdes peerSdes¶

Peer SDES.

struct RtcpStreamStat

#include <call.hpp>

Unidirectional RTP stream statistics.

Public Functions

void fromPj(const pjmedia_rtcp_stream_stat &prm)¶: Convert from pjsip.

Public Members

TimeVal update¶

Time of last update.

unsigned updateCount¶: Number of updates (to calculate avg)

unsigned pkt¶: Total number of packets

unsigned bytes¶: Total number of payload/bytes

unsigned discard¶

Total number of discarded packets.

unsigned loss¶: Total number of packets lost

unsigned reorder¶: Total number of out of order packets

unsigned dup¶: Total number of duplicates packets

MathStat lossPeriodUsec¶: Loss period statistics

LossType lossType¶

Types of loss detected.

MathStat jitterUsec¶: Jitter statistics

struct SdpSession

#include <call.hpp>

This structure describes SDP session description.

It corresponds to the pjmedia_sdp_session structure.

Public Functions

void fromPj(const pjmedia_sdp_session &sdp)¶: Convert from pjsip.

Public Members

string wholeSdp¶: The whole SDP as a string.

void *pjSdpSession¶

Pointer to its original pjmedia_sdp_session.

Only valid when the struct is converted from PJSIP’s pjmedia_sdp_session.

struct StreamInfo

#include <call.hpp>

Media stream info.

Public Functions

StreamInfo()¶: Default constructor.

void fromPj(const pjsua_stream_info &info)¶: Convert from pjsip.

Public Members

pjmedia_type type¶: Media type of this stream.

pjmedia_tp_proto proto¶: Transport protocol (RTP/AVP, etc.)

pjmedia_dir dir¶: Media direction.

SocketAddress remoteRtpAddress¶: Remote RTP address.

SocketAddress remoteRtcpAddress¶: Optional remote RTCP address.

unsigned txPt¶: Outgoing codec payload type.

unsigned rxPt¶: Incoming codec payload type.

string codecName¶: Codec name.

unsigned codecClockRate¶: Codec clock rate.

CodecParam audCodecParam¶: Optional audio codec param.

VidCodecParam vidCodecParam¶: Optional video codec param.

struct StreamStat

#include <call.hpp>

Media stream statistic.

Public Functions

void fromPj(const pjsua_stream_stat &prm)¶: Convert from pjsip.

Public Members

RtcpStat rtcp¶: RTCP statistic.

JbufState jbuf¶: Jitter buffer statistic.

presence.hpp¶

PJSUA2 Presence Operations.

namespace pj

PJSUA2 API is inside pj namespace.

Typedefs

typedef std::vector<Buddy *> BuddyVector¶

Warning: deprecated, use BuddyVector2 instead.

Array of buddies.

typedef std::vector<Buddy> BuddyVector2¶: Array of buddies.

class Buddy

#include <presence.hpp>

Buddy.

This is a lite wrapper class for PJSUA-LIB buddy, i.e: this class only maintains one data member, PJSUA-LIB buddy ID, and the methods are simply proxies for PJSUA-LIB buddy operations.

Application can use create() to register a buddy to PJSUA-LIB, and the destructor of the original instance (i.e: the instance that calls create()) will unregister and delete the buddy from PJSUA-LIB. Application must delete all Buddy instances belong to an account before shutting down the account (via Account::shutdown()).

The library will not keep a list of Buddy instances, so any Buddy (or descendant) instances instantiated by application must be maintained and destroyed by the application itself. Any PJSUA2 APIs that return Buddy instance(s) such as Account::enumBuddies2() or Account::findBuddy2() will just return generated copy. All Buddy methods should work normally on this generated copy instance.

Public Functions

Buddy(): Constructor.

virtual ~Buddy()

Destructor.

Note that if the Buddy original instance (i.e: the instance that calls Buddy::create()) is destroyed, it will also delete the corresponding buddy in the PJSUA-LIB. While the destructor of a generated copy (i.e: Buddy instance returned by PJSUA2 APIs such as Account::enumBuddies2() or Account::findBuddy2()) will do nothing.

void create(Account &acc, const BuddyConfig &cfg)

Create buddy and register the buddy to PJSUA-LIB.

Note that application should maintain the Buddy original instance, i.e: the instance that calls this create() method as it is only the original instance destructor that will delete the underlying Buddy in PJSUA-LIB.

Parameters

acc: The account for this buddy.
cfg: The buddy config.

bool isValid() const

Check if this buddy is valid.

Return: True if it is.

BuddyInfo getInfo() const

Get detailed buddy info.

Return: Buddy info.

void subscribePresence(bool subscribe)

Enable/disable buddy’s presence monitoring.

Once buddy’s presence is subscribed, application will be informed about buddy’s presence status changed via onBuddyState() callback.

Parameters

subscribe: Specify true to activate presence subscription.

void updatePresence(void)

Update the presence information for the buddy.

Although the library periodically refreshes the presence subscription for all buddies, some application may want to refresh the buddy’s presence subscription immediately, and in this case it can use this function to accomplish this.

Note that the buddy’s presence subscription will only be initiated if presence monitoring is enabled for the buddy. See subscribePresence() for more info. Also if presence subscription for the buddy is already active, this function will not do anything.

Once the presence subscription is activated successfully for the buddy, application will be notified about the buddy’s presence status in the onBuddyState() callback.

void sendInstantMessage(const SendInstantMessageParam &prm)

Send instant messaging outside dialog, using this buddy’s specified account for route set and authentication.

Parameters

prm: Sending instant message parameter.

void sendTypingIndication(const SendTypingIndicationParam &prm)

Send typing indication outside dialog.

Parameters

prm: Sending instant message parameter.

virtual void onBuddyState()

Notify application when the buddy state has changed.

Application may then query the buddy info to get the details.

virtual void onBuddyEvSubState(OnBuddyEvSubStateParam &prm)

Notify application when the state of client subscription session associated with a buddy has changed.

Application may use this callback to retrieve more detailed information about the state changed event.

Parameters

prm: Callback parameter.

Private Functions

Buddy(pjsua_buddy_id buddy_id)¶

Buddy *getOriginalInstance()¶

Private Members

pjsua_buddy_id id¶: Buddy ID.

Friends

friend pj::Endpoint

friend pj::Account

struct BuddyConfig : public pj::PersistentObject

#include <presence.hpp>

This structure describes buddy configuration when adding a buddy to the buddy list with Buddy::create().

Public Functions

virtual void readObject(const ContainerNode &node)¶

Read this object from a container node.

Parameters

node: Container to read values from.

virtual void writeObject(ContainerNode &node) const¶

Write this object to a container node.

Parameters

node: Container to write values to.

Public Members

string uri¶: Buddy URL or name address.

bool subscribe¶: Specify whether presence subscription should start immediately.

struct BuddyInfo

#include <presence.hpp>

This structure describes buddy info, which can be retrieved by via Buddy::getInfo().

Public Functions

BuddyInfo()¶: Default constructor.

void fromPj(const pjsua_buddy_info &pbi)¶: Import from pjsip structure.

Public Members

string uri¶: The full URI of the buddy, as specified in the configuration.

string contact¶: Buddy’s Contact, only available when presence subscription has been established to the buddy.

bool presMonitorEnabled¶: Flag to indicate that we should monitor the presence information for this buddy (normally yes, unless explicitly disabled).

pjsip_evsub_state subState¶

If presMonitorEnabled is true, this specifies the last state of the presence subscription.

If presence subscription session is currently active, the value will be PJSIP_EVSUB_STATE_ACTIVE. If presence subscription request has been rejected, the value will be PJSIP_EVSUB_STATE_TERMINATED, and the termination reason will be specified in subTermReason.

string subStateName¶: String representation of subscription state.

pjsip_status_code subTermCode¶

Specifies the last presence subscription termination code.

This would return the last status of the SUBSCRIBE request. If the subscription is terminated with NOTIFY by the server, this value will be set to 200, and subscription termination reason will be given in the subTermReason field.

string subTermReason¶

Specifies the last presence subscription termination reason.

If presence subscription is currently active, the value will be empty.

PresenceStatus presStatus¶: Presence status.

struct OnBuddyEvSubStateParam¶

#include <presence.hpp>

This structure contains parameters for Buddy::onBuddyEvSubState() callback.

Public Members

SipEvent e¶

The event which triggers state change event.

struct PresenceStatus

#include <presence.hpp>

This describes presence status.

Public Functions

PresenceStatus()¶: Constructor.

Public Members

pjsua_buddy_status status¶: Buddy’s online status.

string statusText¶: Text to describe buddy’s online status.

pjrpid_activity activity¶: Activity type.

string note¶: Optional text describing the person/element.

string rpidId¶: Optional RPID ID string.

persistent.hpp¶

PJSUA2 Persistent Services.

namespace pj

PJSUA2 API is inside pj namespace.

struct container_node_internal_data¶

#include <persistent.hpp>

Internal data for ContainerNode.

See ContainerNode implementation notes for more info.

Public Members

void *doc¶

The document.

void *data1¶: Internal data 1.

void *data2¶: Internal data 2.

class ContainerNode¶

#include <persistent.hpp>

A container node is a placeholder for storing other data elements, which could be boolean, number, string, array of strings, or another container.

Each data in the container is basically a name/value pair, with a type internally associated with it so that written data can be read in the correct type. Data is read and written serially, hence the order of reading must be the same as the order of writing.

Application can read data from it by using the various read methods, and write data to it using the various write methods. Alternatively, it may be more convenient to use the provided macros below to read and write the data, because these macros set the name automatically:

NODE_READ_BOOL(node,item)
NODE_READ_UNSIGNED(node,item)
NODE_READ_INT(node,item)
NODE_READ_FLOAT(node,item)
NODE_READ_NUM_T(node,type,item)
NODE_READ_STRING(node,item)
NODE_READ_STRINGV(node,item)
NODE_READ_OBJ(node,item)
NODE_WRITE_BOOL(node,item)
NODE_WRITE_UNSIGNED(node,item)
NODE_WRITE_INT(node,item)
NODE_WRITE_FLOAT(node,item)
NODE_WRITE_NUM_T(node,type,item)
NODE_WRITE_STRING(node,item)
NODE_WRITE_STRINGV(node,item)
NODE_WRITE_OBJ(node,item)

Implementation notes:

The ContainerNode class is subclass-able, but not in the usual C++ way. With the usual C++ inheritance, some methods will be made pure virtual and must be implemented by the actual class. However, doing so will require dynamic instantiation of the ContainerNode class, which means we will need to pass around the class as pointer, for example as the return value of readContainer() and writeNewContainer() methods. Then we will need to establish who needs or how to delete these objects, or use shared pointer mechanism, each of which is considered too inconvenient or complicated for the purpose.

So hence we use C style “inheritance”, where the methods are declared in container_node_op and the data in container_node_internal_data structures. An implementation of ContainerNode class will need to set up these members with values that makes sense to itself. The methods in container_node_op contains the pointer to the actual implementation of the operation, which would be specific according to the format of the document. The methods in this ContainerNode class are just thin wrappers which call the implementation in the container_node_op structure.

Public Functions

bool hasUnread() const¶

Determine if there is unread element.

If yes, then app can use one of the readXxx() functions to read it.

string unreadName() const¶: Get the name of the next unread element.

int readInt(const string &name = "") const¶

Read an integer value from the document and return the value.

This will throw Error if the current element is not a number. The read position will be advanced to the next element.

Return

The value.

Parameters

name: If specified, then the function will check if the name of the next element matches the specified name and throw Error if it doesn’t match.

float readNumber(const string &name = "") const¶

Read a number value from the document and return the value.

This will throw